Skip to content
Surfhog home
Menu

Brittany wave buoy monthly means for 2018

Monthly means from the Brittany wave buoy for 2018, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Latest

Period Summary

Programmatically generated summary. Hog Says

8,553 wave-buoy observations covered all 365 days. Typical wave height was 8.2 ft (10th–90th percentile 3.9–17.1 ft), while mean reported wave period; measurement type unavailable was 7.1 seconds (10th–90th percentile 5–9 seconds). Typical wind was 16.1 mph (10th–90th percentile 6.9–27.7 mph). 28 of 34,212 checked values (0.1%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Wave Height

8.2ft
Mean: 9.4 ft
P10–P90: 3.9 — 17.1 ft
Recorded extremes

1.3 — 35.8 ft

Available for 8,525 of 8,553 hourly samples

Mean Wave Period

7.1secs
P10–P90: 5 — 9secs
Recorded extremes

4 — 13secs

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 8,553 hourly samples

Typical Wind

Variable, 16.1mph
Mean: 16.8 mph
P10–P90: 6.9 — 27.7 mph
Recorded extremes

1.1 — 46.1 mph

Circular concentration: 17%

Chart showing grouped wave observations for Brittany. Use the table on this page for a text version of the same measurements. To open daily observations, use a linked month name in the table.

About Brittany wave buoy

Brittany buoy (WMO 62163) is maintained jointly by the UK Met Office and Météo-France in the Bay of Biscay. Its exposed position west of Brittany monitors Atlantic conditions approaching western France and the western entrance to the English Channel. The international feed can include wind, pressure, temperature and wave observations when available.

Metrics are rows; months run left to right.
Brittany wave buoy monthly means 2018Last observation shown
Metric
Mean wave height (ft)161311107556791312
Mean observed period(s)8Reported8Reported7Reported8Reported7Reported6Reported6Reported6Reported7Reported7Reported8Reported8Reported
Mean wave power(kW/m)------------
Mean wind directionWconcentration 68%Variableconcentration 25%WNWconcentration 35%SWconcentration 31%Nconcentration 36%NEconcentration 33%NNWconcentration 38%WNWconcentration 45%Variableconcentration 7%ENEconcentration 39%SWconcentration 39%SWconcentration 63%
Mean wind speed (mph)232121171313111216172020
Mean water temperature(°C)------------

Swipe sideways to see more months.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Realtime data displayed on this page is from the Met Office Marine observations.

› Wave Buoy List