Skip to content
Surfhog home
Menu

Cormorant AWS wave buoy monthly means for 2015

Monthly means from the Cormorant AWS wave buoy for 2015, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Latest

Period Summary

Programmatically generated summary. Hog Says

8,300 wave-buoy observations covered 350 of 365 days (96%). Typical wave height was 7.9 ft (10th–90th percentile 3.6–16.1 ft), while mean reported wave period; measurement type unavailable was 6.6 seconds (10th–90th percentile 5–8 seconds). Typical wind was 18.3 mph (10th–90th percentile 6.9–32.2 mph). 24 of 33,200 checked values (0.1%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Wave Height

7.9ft
Mean: 9 ft
P10–P90: 3.6 — 16.1 ft
Recorded extremes

1.6 — 41 ft

Available for 8,282 of 8,300 hourly samples

Mean Wave Period

6.6secs
P10–P90: 5 — 8secs
Recorded extremes

4 — 11secs

Available for 8,294 of 8,300 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 8,300 hourly samples

Typical Wind

WSW, 18.3mph
Mean: 18.9 mph
P10–P90: 6.9 — 32.2 mph
Recorded extremes

0 — 58.8 mph

Circular concentration: 33%

Chart showing grouped wave observations for Cormorant AWS. Use the table on this page for a text version of the same measurements. To open daily observations, use a linked month name in the table.

About Cormorant AWS wave buoy

Cormorant AWS (WMO 63112) is an automatic weather station on a privately operated oil platform in the northern North Sea. It is not a free-floating wave buoy. The station provides offshore meteorological observations for operations and forecasting; the parameters available through the international feed depend on the platform's installed sensors.

Metrics are rows; months run left to right.
Cormorant AWS wave buoy monthly means 2015Last observation shown
Metric
Mean wave height (ft)15149976556911QC rejected
Mean observed period(s)8Reported8Reported7Reported7Reported6Reported6Reported5Reported5Reported6Reported7Reported7Reported8Reported
Mean wave power(kW/m)------------
Mean wind directionWSWconcentration 45%WSWconcentration 52%WSWconcentration 47%WNWconcentration 45%Variableconcentration 25%WNWconcentration 33%Variableconcentration 21%Sconcentration 66%Variableconcentration 5%SWconcentration 64%WSWconcentration 47%SWconcentration 55%
Mean wind speed (mph)242517161615141716192226
Mean water temperature(°C)------------

Swipe sideways to see more months.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

› Wave Buoy List