Skip to content
Surfhog home
Menu

K4 wave buoy observations on Mon, Jan 9, 2017

Hourly readings from the K4 wave buoy for Mon, Jan 9, 2017, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

22 wave-buoy observations were recorded during the day. Typical wave height was 30.2 ft (10th–90th percentile 17.4–33.1 ft), while mean reported wave period; measurement type unavailable was 10.1 seconds (10th–90th percentile 8–12 seconds). Typical wind was 36.9 mph (10th–90th percentile 33.1–43.8 mph) and mean water temperature was 11.1°C (10th–90th percentile 11–11.2°C). 4 of 109 checked values (3.7%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for K4. Use the detailed observations table below for the same data in text form.

About K4 wave buoy

K4 (WMO 62105) is a UK Met Office buoy in the North Atlantic northwest of Ireland. Its remote position samples weather and sea conditions moving towards northern UK and Irish waters. The international station feed can include wind, pressure, temperature and wave observations, although the reported parameters vary with sensor availability.

Metrics are rows; hours run left to right. Times use your device time zone.
K4 wave buoy hourly observations Mon, Jan 9, 2017Last observation shown
Metric
Wave height (ft)16171718191819--0QC rejected30313434332933323231303031
Observed period(s)8Reported8Reported8Reported8Reported8Reported8Reported9Reported--QC rejected10Reported10Reported11Reported11Reported13Reported13Reported11Reported12Reported11Reported11Reported11Reported10Reported11Reported11Reported
Wave power(kW/m)------------------------
Wind directionWWWNWNW--WWWWWWWWNWNWNWWNWWNWWNWWNWWNW
Wind speed (mph)343342QC rejected303844--3640373841374247QC rejected443737333331
Water temperature(°C)11.211.211.211.211.211.211.1---11.111.011.011.011.011.011.011.011.111.011.111.011.011.0

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the UK Met Office.

› Wave Buoy List