Skip to content
Surfhog home
Menu

K7 wave buoy daily means for Nov 2013

Daily means from the K7 wave buoy for Nov 2013, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

149 wave-buoy observations covered 7 of 30 days (23%). Typical wave height was 14.1 ft (10th–90th percentile 11.4–19.5 ft), while mean reported wave period; measurement type unavailable was 7.9 seconds (10th–90th percentile 7–9 seconds). Typical wind was 27.7 mph (10th–90th percentile 15–35.8 mph) and mean water temperature was 10.7°C (10th–90th percentile 10.5–11°C). All 745 checked values passed quality control. Across 2 comparable years, mean wave height was above the same-month mean of 12 ft and mean wave period was above the same-month mean of 7.3 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Wave Height

14.1ft
Mean: 15 ft
P10–P90: 11.4 — 19.5 ft
Recorded extremes

9.5 — 26.2 ft

Mean Wave Period

7.9secs
P10–P90: 7 — 9secs
Recorded extremes

6 — 10secs

Mean Water Temperature

10.7°C
P10–P90: 10.5 — 11°C
Recorded extremes

10.2 — 11°C

Typical Wind

W, 27.7mph
Mean: 26.6 mph
P10–P90: 15 — 35.8 mph
Recorded extremes

5.8 — 47.2 mph

Circular concentration: 90%

Compared With Previous Novembers

Historical baseline from 1,426 observations across 2 years.

Wave Height
15ft
3ft above mean
Historical mean 12ft
Wave Period
7.9s
0.6s above mean
Historical mean 7.3s
Water Temperature
10.7°C
1°C above mean
Historical mean 9.7°C

Chart showing grouped wave observations for K7. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About K7 wave buoy

K7 (WMO 64046) is a UK Met Office buoy west of Shetland in the North Atlantic. Its position monitors ocean weather and sea conditions approaching the Northern Isles. The international feed can include wind, pressure, air and sea temperature, and wave observations when the relevant sensors are reporting.

Metrics are rows; days run left to right.
K7 wave buoy daily means Nov 2013Last observation shown
Metric
Mean wave height (ft)-----------------------15121216172014
Mean observed period(s)-----------------------10Reported9Reported7Reported7Reported9Reported8Reported7Reported
Mean wave power(kW/m)------------------------------
Mean wind direction-----------------------WNWconcentration 86%Wconcentration 98%Wconcentration 98%Wconcentration 98%Wconcentration 86%NWconcentration 84%Wconcentration 97%
Mean wind speed (mph)-----------------------7162933233528
Mean water temperature(°C)-----------------------11.010.910.610.510.710.710.6

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the UK Met Office.

› Wave Buoy List