Skip to content
Surfhog home
Menu

K7 wave buoy daily means for Feb 2014

Daily means from the K7 wave buoy for Feb 2014, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

665 wave-buoy observations covered all 28 days. Typical wave height was 0 ft; wave-period data were unavailable. Typical wind was 25.3 mph (10th–90th percentile 12.8–35.8 mph). 665 of 2,660 checked values (25%) were excluded by quality control. Across 1 comparable year, mean wave height was below the same-month mean of 17.5 ft.

Generated only from the observations and comparisons shown on this page.

Typical Wave Height

0ft
Mean: 0 ft
P10–P90: 0 — 0 ft
Recorded extremes

0 — 0 ft

Mean Wave Period

-secs
P10–P90: - — -secs

Available for 0 of 665 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 665 hourly samples

Typical Wind

S, 25.3mph
Mean: 25 mph
P10–P90: 12.8 — 35.8 mph
Recorded extremes

3.4 — 47.2 mph

Circular concentration: 33%

Compared With Previous Februarys

Historical baseline from 671 observations across 1 year.

Wave Height
0ft
17.5ft below mean
Historical mean 17.5ft
Wave Period
–
Not enough comparable data
Historical mean 8.8s
Water Temperature
–
Not enough comparable data
Historical mean 8.2°C

Chart showing grouped wave observations for K7. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About K7 wave buoy

K7 (WMO 64046) is a UK Met Office buoy west of Shetland in the North Atlantic. Its position monitors ocean weather and sea conditions approaching the Northern Isles. The international feed can include wind, pressure, air and sea temperature, and wave observations when the relevant sensors are reporting.

Metrics are rows; days run left to right.
K7 wave buoy daily means Feb 2014Last observation shown
Metric
Mean wave height (ft)0000000000000000000000000000
Mean observed period(s)----------------------------
Mean wave power(kW/m)----------------------------
Mean wind directionSEconcentration 96%SSWconcentration 88%Sconcentration 96%SSEconcentration 96%SEconcentration 93%SSEconcentration 47%WSWconcentration 95%SEconcentration 82%ENEconcentration 47%Wconcentration 98%Sconcentration 86%Sconcentration 73%NEconcentration 85%Nconcentration 87%NNEconcentration 93%NNWconcentration 91%Nconcentration 98%NEconcentration 93%SEconcentration 92%SSEconcentration 64%SSWconcentration 91%WSWconcentration 86%SSWconcentration 98%SWconcentration 92%SEconcentration 98%SSWconcentration 84%SSWconcentration 87%Sconcentration 95%
Mean wind speed (mph)35303329292416241320252333192523121714332828322830242529
Mean water temperature(°C)----------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

Which wave period is shown?

The table shows the best period measurement supplied for each observation. It is not necessarily the energy period used to calculate wave power.

Tp
Peak period: the period at the strongest spectral peak.
Tavg
The provider's average wave period.
Tm02
A mean period calculated from the wave spectrum.
Tz
Mean zero-crossing period.
Reported
A legacy value whose period type was not recorded.
Mixed
A daily or monthly mean containing more than one period type.

Wave power needs a genuine energy period (Te). SurfHog does not substitute Tp, Tavg, Tm02 or Tz when Te is missing.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the UK Met Office.

› Wave Buoy List