Skip to content
Surfhog home
Menu

Bracklesham Bay wave buoy daily means for Oct 2009

Daily means from the Bracklesham Bay wave buoy for Oct 2009, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,490 wave-buoy observations covered all 31 days. Typical wave height was 2 ft (10th–90th percentile 0.8–4.1 ft), while mean average of more than one wave period type was 7.7 seconds (10th–90th percentile 3.9–12.9 seconds). Mean water temperature was 14.9°C (10th–90th percentile 13.8–16.2°C). 23 of 5,874 checked values (0.4%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2ft
Mean: 2.2 ft
P10–P90: 0.8 — 4.1 ft
Recorded extremes

0.4 — 6 ft

Available for 743 of 745 hourly samples

Mean Observed Wave Period

7.7secs
P10–P90: 3.9 — 12.9secs
Recorded extremes

1.8 — 20secs

Available for 741 of 745 hourly samples

Observed Wave Direction

SSW

Circular concentration: 92%

Mean Water Temperature

14.9°C
P10–P90: 13.8 — 16.2°C
Recorded extremes

12.9 — 16.7°C

Available for 742 of 745 hourly samples

Chart showing grouped wave observations for Bracklesham Bay. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Bracklesham Bay wave buoy

Bracklesham Bay is a Channel Coastal Observatory National Network wave station off the West Sussex coast. Its nearshore position records conditions entering the broad bay between Selsey and Hayling Island, supporting coastal management along an exposed beach frontage west of Chichester Harbour.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Bracklesham Bay wave buoy daily means Oct 2009Last observation shown
Metric
Mean significant wave height (ft)1143133122311111112434245333222
Mean maximum wave height (ft)1274245233422211114656467444334
Mean peak period (s)756755865569131179797696767916131089
Mean zero-crossing period (s)3344434433446543343444444446544
Mean energy period (s)-------------------------------
Mean wave power, kilowatts per metre-------------------------------
Mean peak wave directionSWconcentration 81%WSWconcentration 87%SWconcentration 94%SWconcentration 100%SSWconcentration 94%SSWconcentration 97%SSWconcentration 100%Sconcentration 94%SSEconcentration 92%SWconcentration 100%SWconcentration 99%SWconcentration 96%SSWconcentration 100%SSWconcentration 97%SSWconcentration 92%SWconcentration 79%WSWconcentration 81%SSWconcentration 98%SSWconcentration 99%Sconcentration 98%SSWconcentration 99%SSWconcentration 99%SSWconcentration 99%SSWconcentration 99%SWconcentration 100%SSWconcentration 99%SSWconcentration 100%SSWconcentration 100%SSWconcentration 95%Sconcentration 95%SSWconcentration 99%
Mean directional spread (°)31.131.021.522.725.624.825.331.025.821.321.623.321.724.627.335.833.435.127.923.624.822.521.422.118.619.225.019.720.923.220.8
Mean water temperature(°C)16.616.416.115.916.016.116.216.015.615.515.315.015.115.115.014.914.514.114.013.813.713.914.014.113.913.814.114.414.414.414.4

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List