Skip to content
Surfhog home
Menu

Bracklesham Bay wave buoy monthly means for 2010

Monthly means from the Bracklesham Bay wave buoy for 2010, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Latest

Period Summary

Programmatically generated summary. Hog Says

17,505 wave-buoy observations covered all 365 days. Typical wave height was 1.6 ft (10th–90th percentile 0.8–3.8 ft), while mean average of more than one wave period type was 7.6 seconds (10th–90th percentile 3.3–13.3 seconds). Mean water temperature was 11.4°C (10th–90th percentile 4.7–18.3°C). 206 of 68,342 checked values (0.3%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1.6ft
Mean: 2 ft
P10–P90: 0.8 — 3.8 ft
Recorded extremes

0.4 — 11.4 ft

Available for 8,744 of 8,757 hourly samples

Mean Observed Wave Period

7.6secs
P10–P90: 3.3 — 13.3secs
Recorded extremes

1.7 — 25secs

Available for 8,726 of 8,757 hourly samples

Observed Wave Direction

SSW

Circular concentration: 87%

Mean Water Temperature

11.4°C
P10–P90: 4.7 — 18.3°C
Recorded extremes

2.5 — 20.1°C

Available for 8,708 of 8,757 hourly samples

Chart showing grouped wave observations for Bracklesham Bay. Use the table on this page for a text version of the same measurements. To open daily observations, use a linked month name in the table.

About Bracklesham Bay wave buoy

Bracklesham Bay is a Channel Coastal Observatory National Network wave station off the West Sussex coast. Its nearshore position records conditions entering the broad bay between Selsey and Hayling Island, supporting coastal management along an exposed beach frontage west of Chichester Harbour.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; months run left to right.
Bracklesham Bay wave buoy monthly means 2010Last observation shown
Metric
Mean significant wave height (ft)232211222232
Mean maximum wave height (ft)343322333443
Mean peak period (s)9118788668787
Mean zero-crossing period (s)444444434444
Mean energy period (s)------------
Mean wave power, kilowatts per metre------------
Mean peak wave directionSSWconcentration 87%SSWconcentration 95%SSWconcentration 88%SSWconcentration 84%SSWconcentration 87%SSWconcentration 85%SWconcentration 98%SWconcentration 92%SSWconcentration 94%SSWconcentration 86%SSWconcentration 87%SSWconcentration 74%
Mean directional spread (°)25.425.726.626.527.827.223.323.326.125.524.326.1
Mean water temperature(°C)4.74.96.19.312.216.218.618.116.614.210.95.0

Swipe sideways to see more months.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List