Skip to content
Surfhog home
Menu

Bracklesham Bay wave buoy observations on Fri, Nov 23, 2012

Hourly readings from the Bracklesham Bay wave buoy for Fri, Nov 23, 2012, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

48 wave-buoy observations were recorded during the day. Typical wave height was 3.8 ft (10th–90th percentile 2.6–7 ft), while mean peak wave period was 11.1 seconds (10th–90th percentile 8.6–12.8 seconds). Mean water temperature was 11°C (10th–90th percentile 10.8–11.2°C). All 192 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Bracklesham Bay. Use the detailed observations table below for the same data in text form.

About Bracklesham Bay wave buoy

Bracklesham Bay is a Channel Coastal Observatory National Network wave station off the West Sussex coast. Its nearshore position records conditions entering the broad bay between Selsey and Hayling Island, supporting coastal management along an exposed beach frontage west of Chichester Harbour.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; hours run left to right. Times use your device time zone.
Bracklesham Bay wave buoy hourly observations Fri, Nov 23, 2012Last observation shown
Metric
Significant wave height (ft)777767787777766554443333333333344454443333322222
Maximum wave height (ft)121081112101013121010111191086-655455544464675778756545433333
Peak period (s)888888111011111112121113131313131314131312111212111213131010101010101011121213141011151310
Zero-crossing period (s)556666677776666676666666666666667777776676666666
Energy period (s)------------------------------------------------
Wave power, kilowatts per metre------------------------------------------------
Peak wave directionSSWSSWSSWSSWSSWSSWSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSWSWSSWSSWSSWSSWSSWSSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSWSSW
Directional spread (°)23.015.018.016.025.020.011.014.011.013.08.011.09.014.011.015.018.019.014.016.018.020.013.014.016.018.011.015.010.012.013.09.013.011.09.013.08.017.012.015.023.019.021.012.023.018.025.016.0
Water temperature(°C)11.111.111.011.110.910.810.810.910.910.911.211.311.211.211.210.810.810.810.810.810.810.810.810.810.911.111.111.111.111.211.211.211.211.211.211.211.211.211.211.111.110.910.810.910.910.910.810.9

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List