Skip to content
Surfhog home
Menu

Bracklesham Bay wave buoy daily means for Dec 2014

Daily means from the Bracklesham Bay wave buoy for Dec 2014, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,463 wave-buoy observations covered all 31 days. Typical wave height was 2.8 ft (10th–90th percentile 0.9–6.8 ft), while mean average of more than one wave period type was 7 seconds (10th–90th percentile 3.4–10 seconds). Mean water temperature was 9.2°C (10th–90th percentile 8.2–10°C). 15 of 5,114 checked values (0.3%) were excluded by quality control. Across 4 comparable years, mean wave height was below the same-month mean of 3.5 ft and mean wave period was below the same-month mean of 8 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.8ft
Mean: 3.3 ft
P10–P90: 0.9 — 6.8 ft
Recorded extremes

0.5 — 12 ft

Mean Observed Wave Period

7secs
P10–P90: 3.4 — 10secs
Recorded extremes

1.7 — 18.2secs

Available for 741 of 744 hourly samples

Observed Wave Direction

SSW

Circular concentration: 86%

Mean Water Temperature

9.2°C
P10–P90: 8.2 — 10°C
Recorded extremes

7 — 10.6°C

Available for 409 of 744 hourly samples

Compared With Previous Decembers

Historical baseline from 5,769 observations across 4 years.

Wave Height
3.3ft
0.2ft below mean
Historical mean 3.543ft
Wave Period
7s
1s below mean
Historical mean 8s
Water Temperature
9.2°C
1.2°C above mean
Historical mean 8°C

Chart showing grouped wave observations for Bracklesham Bay. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Bracklesham Bay wave buoy

Bracklesham Bay is a Channel Coastal Observatory National Network wave station off the West Sussex coast. Its nearshore position records conditions entering the broad bay between Selsey and Hayling Island, supporting coastal management along an exposed beach frontage west of Chichester Harbour.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Bracklesham Bay wave buoy daily means Dec 2014Last observation shown
Metric
Mean significant wave height (ft)1111113345772432476446542341113
Mean maximum wave height (ft)22222254681011364271095610764562215
Mean peak period (s)8646710677891010777788778776785475
Mean zero-crossing period (s)4334344445566454555445444443334
Mean energy period (s)-------------------------------
Mean wave power, kilowatts per metre-------------------------------
Mean peak wave directionSconcentration 90%Wconcentration 52%Variableconcentration 14%Sconcentration 92%SWconcentration 77%SWconcentration 90%SWconcentration 98%SWconcentration 97%SSWconcentration 100%SSWconcentration 100%SSWconcentration 100%SSWconcentration 99%SSWconcentration 100%SSWconcentration 99%SWconcentration 100%SWconcentration 91%SSWconcentration 99%SSWconcentration 100%SSWconcentration 100%SWconcentration 99%SWconcentration 99%SSWconcentration 100%SWconcentration 100%SWconcentration 97%SWconcentration 87%SSWconcentration 99%SWconcentration 96%Sconcentration 51%WSWconcentration 81%SWconcentration 90%SSWconcentration 99%
Mean directional spread (°)27.626.825.925.626.324.121.721.222.422.721.519.722.320.521.722.620.321.421.419.720.720.119.720.922.421.922.226.323.726.220.3
Mean water temperature(°C)-----9.79.89.69.49.59.39.79.39.48.99.29.39.610.0--------8.78.38.08.0

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List