Skip to content
Surfhog home
Menu

Brent "A" AWS wave buoy observations on Sun, Aug 26, 2018

Hourly readings from the Brent "A" AWS wave buoy for Sun, Aug 26, 2018, including available wave height, period, direction, wind and sea temperature data.

Last observation shown none

Oldest observation available

Latest

Period Summary

Programmatically generated summary. Hog Says

No wave-buoy observations were recorded for this period, so no wave statistics are available.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Brent "A" AWS. Use the detailed observations table below for the same data in text form.

About Brent "A" AWS wave buoy

Brent “A” AWS (WMO 63113) is an offshore platform weather station in the North Sea (61.0000°N, 1.7000°E). It provides wind/pressure/temperature observations and (where available) sea‑state measurements used by forecasters and offshore operators.

Metrics are rows; hours run left to right. Times use your device time zone.
Brent "A" AWS wave buoy hourly observations Sun, Aug 26, 2018Last observation shown unknown
Metric

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List