Skip to content
Surfhog home
Menu

Chapel Point wave buoy daily means for Jun 2013

Daily means from the Chapel Point wave buoy for Jun 2013, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,440 wave-buoy observations covered all 30 days. Typical wave height was 2 ft (10th–90th percentile 1.2–2.8 ft), while mean peak wave period was 5.2 seconds (10th–90th percentile 3–8 seconds). Mean water temperature was 13.5°C (10th–90th percentile 12.2–14.7°C). All 5,760 checked values passed quality control. Across 1 comparable year, mean wave height was below the same-month mean of 2.6 ft and mean wave period was below the same-month mean of 5.7 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2ft
Mean: 2 ft
P10–P90: 1.2 — 2.8 ft
Recorded extremes

0.6 — 4.1 ft

Mean Observed Wave Period

5.2secs
P10–P90: 3 — 8secs
Recorded extremes

1.7 — 11.1secs

Observed Wave Direction

NE

Circular concentration: 52%

Mean Water Temperature

13.5°C
P10–P90: 12.2 — 14.7°C
Recorded extremes

11.4 — 15.7°C

Compared With Previous Junes

Historical baseline from 1,440 observations across 1 year.

Wave Height
2ft
0.6ft below mean
Historical mean 2.625ft
Wave Period
5.2s
0.5s below mean
Historical mean 5.7s
Water Temperature
13.5°C
0.8°C below mean
Historical mean 14.3°C

Chart showing grouped wave observations for Chapel Point. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Chapel Point wave buoy

Chapel Point is a Channel Coastal Observatory wave station off the Lincolnshire coast near Chapel St Leonards. Its shallow North Sea setting records conditions approaching a low-lying, heavily managed sandy frontage north of Skegness, supporting flood and erosion monitoring.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Chapel Point wave buoy daily means Jun 2013Last observation shown
Metric
Mean significant wave height (ft)222322222222322212112323213321
Mean maximum wave height (ft)------------------------------
Mean peak period (s)566558654653434464435447867964
Mean zero-crossing period (s)445444333433333334434334544543
Mean energy period (s)------------------------------
Mean wave power, kilowatts per metre------------------------------
Mean peak wave directionNNEconcentration 99%NNEconcentration 99%NNEconcentration 100%NNEconcentration 99%NEconcentration 100%NNEconcentration 99%NEconcentration 92%ENEconcentration 95%NEconcentration 96%NNEconcentration 99%Econcentration 65%Sconcentration 98%SSWconcentration 77%Sconcentration 95%Sconcentration 94%SSEconcentration 61%NEconcentration 90%Econcentration 98%ENEconcentration 97%ENEconcentration 95%ENEconcentration 98%Sconcentration 92%SWconcentration 49%NNEconcentration 95%NNEconcentration 100%NNEconcentration 99%NNEconcentration 98%NNEconcentration 100%NNEconcentration 97%Variableconcentration 23%
Mean directional spread (°)25.124.324.227.827.929.631.430.435.629.129.027.826.827.026.928.533.329.030.634.529.425.329.626.529.129.125.128.124.432.2
Mean water temperature(°C)11.611.812.312.212.412.512.712.812.912.913.013.113.313.513.613.813.813.914.114.114.314.414.414.414.514.514.614.514.714.9

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List