Skip to content
Surfhog home
Menu

Chapel Point wave buoy daily means for Dec 2014

Daily means from the Chapel Point wave buoy for Dec 2014, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,487 wave-buoy observations covered all 31 days. Typical wave height was 2.7 ft (10th–90th percentile 1.9–4.3 ft), while mean average of more than one wave period type was 6.6 seconds (10th–90th percentile 3.3–11.5 seconds). Mean water temperature was 7.5°C (10th–90th percentile 6.4–9.3°C). 30 of 5,945 checked values (0.5%) were excluded by quality control. Across 2 comparable years, mean wave height was above the same-month mean of 2.9 ft and mean wave period was above the same-month mean of 6.4 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.7ft
Mean: 3 ft
P10–P90: 1.9 — 4.3 ft
Recorded extremes

1.1 — 8.8 ft

Mean Observed Wave Period

6.6secs
P10–P90: 3.3 — 11.5secs
Recorded extremes

2.2 — 20secs

Available for 742 of 744 hourly samples

Observed Wave Direction

ENE

Circular concentration: 35%

Mean Water Temperature

7.5°C
P10–P90: 6.4 — 9.3°C
Recorded extremes

5.6 — 10.1°C

Compared With Previous Decembers

Historical baseline from 2,974 observations across 2 years.

Wave Height
3ft
0.1ft above mean
Historical mean 2.92ft
Wave Period
6.6s
0.2s above mean
Historical mean 6.4s
Water Temperature
7.5°C
1.4°C above mean
Historical mean 6.1°C

Chart showing grouped wave observations for Chapel Point. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Chapel Point wave buoy

Chapel Point is a Channel Coastal Observatory wave station off the Lincolnshire coast near Chapel St Leonards. Its shallow North Sea setting records conditions approaching a low-lying, heavily managed sandy frontage north of Skegness, supporting flood and erosion monitoring.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Chapel Point wave buoy daily means Dec 2014Last observation shown
Metric
Mean significant wave height (ft)3653233343324323322333323343322
Mean maximum wave height (ft)-------------------------------
Mean peak period (s)67665656744612812131174764468766675
Mean zero-crossing period (s)4544443443335434433443334444443
Mean energy period (s)-------------------------------
Mean wave power, kilowatts per metre-------------------------------
Mean peak wave directionENEconcentration 99%NNEconcentration 93%NEconcentration 97%ENEconcentration 99%NNEconcentration 87%NEconcentration 52%Variableconcentration 7%Variableconcentration 26%Variableconcentration 26%SSWconcentration 68%SSWconcentration 88%Variableconcentration 28%NNEconcentration 100%ESEconcentration 51%NNEconcentration 48%NNEconcentration 99%NEconcentration 94%SSEconcentration 35%Variableconcentration 26%NNEconcentration 48%SSEconcentration 31%SSWconcentration 95%Sconcentration 98%Variableconcentration 12%NNEconcentration 85%ENEconcentration 64%ENEconcentration 90%ENEconcentration 97%NNEconcentration 99%NNEconcentration 96%Sconcentration 61%
Mean directional spread (°)23.721.326.723.826.424.427.031.921.836.027.031.126.323.839.229.825.827.233.728.126.025.026.441.329.431.827.126.522.923.722.3
Mean water temperature(°C)9.99.79.59.39.18.78.68.37.87.87.47.37.06.76.76.76.66.76.86.76.66.97.17.37.27.16.96.86.56.26.0

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List