Skip to content
Surfhog home
Menu

Chapel Point wave buoy daily means for Mar 2015

Daily means from the Chapel Point wave buoy for Mar 2015, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,483 wave-buoy observations covered all 31 days. Typical wave height was 2.4 ft (10th–90th percentile 1.1–4.2 ft), while mean peak wave period was 6.1 seconds (10th–90th percentile 3–10.1 seconds). Mean water temperature was 5.8°C (10th–90th percentile 4.7–6.8°C). 35 of 5,931 checked values (0.6%) were excluded by quality control. Across 2 comparable years, mean wave height was below the same-month mean of 3.3 ft and mean wave period was below the same-month mean of 6.9 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.4ft
Mean: 2.6 ft
P10–P90: 1.1 — 4.2 ft
Recorded extremes

0.5 — 7.3 ft

Mean Observed Wave Period

6.1secs
P10–P90: 3 — 10.1secs
Recorded extremes

1.8 — 28.6secs

Available for 740 of 742 hourly samples

Observed Wave Direction

NE

Circular concentration: 36%

Mean Water Temperature

5.8°C
P10–P90: 4.7 — 6.8°C
Recorded extremes

4.5 — 7.5°C

Compared With Previous Marchs

Historical baseline from 2,972 observations across 2 years.

Wave Height
2.6ft
0.7ft below mean
Historical mean 3.314ft
Wave Period
6.1s
0.8s below mean
Historical mean 6.9s
Water Temperature
5.8°C
0.3°C above mean
Historical mean 5.5°C

Chart showing grouped wave observations for Chapel Point. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Chapel Point wave buoy

Chapel Point is a Channel Coastal Observatory wave station off the Lincolnshire coast near Chapel St Leonards. Its shallow North Sea setting records conditions approaching a low-lying, heavily managed sandy frontage north of Skegness, supporting flood and erosion monitoring.

Its current data source reports wave height, wave period, wave direction, directional spread, wave power and sea temperature.

Metrics are rows; days run left to right.
Chapel Point wave buoy daily means Mar 2015Last observation shown
Metric
Mean significant wave height (ft)3323223221223443223253112332235
Mean maximum wave height (ft)-------------------------------
Mean peak period (s)44369348815655667766578457574456
Mean zero-crossing period (s)3334433334434444544455333343344
Mean energy period (s)-------------------------------
Mean wave power, kilowatts per metre-------------------------------
Mean peak wave directionSWconcentration 78%WSWconcentration 34%SWconcentration 58%NNEconcentration 52%NNEconcentration 38%Sconcentration 75%Sconcentration 99%SSEconcentration 37%SEconcentration 38%Nconcentration 71%Econcentration 66%Econcentration 85%Econcentration 99%ENEconcentration 99%ENEconcentration 99%NEconcentration 99%ENEconcentration 99%NEconcentration 96%NEconcentration 99%NEconcentration 84%NNEconcentration 97%NEconcentration 91%SSEconcentration 42%Nconcentration 90%NNEconcentration 97%Variableconcentration 18%NNEconcentration 99%Sconcentration 79%Variableconcentration 25%Nconcentration 45%NNWconcentration 71%
Mean directional spread (°)27.430.731.830.438.035.123.136.236.449.732.028.822.423.025.024.422.027.025.731.125.325.138.832.429.925.520.421.523.625.320.1
Mean water temperature(°C)4.84.74.74.74.84.95.05.25.35.45.55.75.85.85.95.95.95.96.06.16.36.46.46.56.66.66.86.86.96.86.9

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Regional Coastal Monitoring Programme.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List