Skip to content
Surfhog home
Menu

Fanø Bugt wave buoy daily means for Sep 2001

Daily means from the Fanø Bugt wave buoy for Sep 2001, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

239 wave-buoy observations covered all 30 days. Typical wave height was 2.4 ft (10th–90th percentile 1.1–5.1 ft), while mean average of more than one wave period type was 3.9 seconds (10th–90th percentile 2.8–5 seconds). All 713 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.4ft
Mean: 2.8 ft
P10–P90: 1.1 — 5.1 ft
Recorded extremes

0.5 — 7.3 ft

Available for 235 of 239 hourly samples

Mean Observed Wave Period

3.9secs
P10–P90: 2.8 — 5secs
Recorded extremes

2.5 — 6secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 239 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 239 hourly samples

Chart showing grouped wave observations for Fanø Bugt. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Fanø Bugt wave buoy

Fanø Bugt is a Danish Coastal Authority directional buoy in the eastern North Sea southwest of Esbjerg. Its setting between the open sea, the island of Fanø and the approaches to the Wadden Sea represents conditions relevant to the harbour entrance, tidal inlets and the low-lying southwest Danish coast.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Fanø Bugt wave buoy daily means Sep 2001Last observation shown
Metric
Mean significant wave height (ft)354332466532544322322112111122
Mean average wave height (ft)------------------------------
Mean maximum wave height (ft)686554699853866543533223221123
Mean average period (s)454544455554544543433433333433
Mean zero-crossing period (s)444443445444444543333333333333
Mean maximum wave period (s)------------------------------
Mean peak wave directionWconcentration 97%Wconcentration 98%Wconcentration 99%Wconcentration 100%WNWconcentration 98%Wconcentration 100%Wconcentration 100%Wconcentration 97%WNWconcentration 98%WNWconcentration 98%Wconcentration 100%Wconcentration 99%WSWconcentration 96%Wconcentration 99%WSWconcentration 95%Wconcentration 100%WNWconcentration 81%NNWconcentration 59%SSEconcentration 49%ENEconcentration 94%NNWconcentration 90%WNWconcentration 99%NEconcentration 70%NEconcentration 99%Econcentration 97%Sconcentration 94%SWconcentration 99%Wconcentration 86%Sconcentration 47%Sconcentration 78%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Danish Coastal Authority wave-measurement network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List