Skip to content
Surfhog home
Menu

Fanø Bugt wave buoy daily means for Dec 2002

Daily means from the Fanø Bugt wave buoy for Dec 2002, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

219 wave-buoy observations covered 28 of 31 days (90%). Typical wave height was 1.9 ft (10th–90th percentile 1.2–3.4 ft), while mean average of more than one wave period type was 3.4 seconds (10th–90th percentile 2.7–4.1 seconds). 1 of 652 checked values (0.2%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1.9ft
Mean: 2.2 ft
P10–P90: 1.2 — 3.4 ft
Recorded extremes

0.7 — 5.5 ft

Available for 215 of 218 hourly samples

Mean Observed Wave Period

3.4secs
P10–P90: 2.7 — 4.1secs
Recorded extremes

2.5 — 4.7secs

Available for 217 of 218 hourly samples

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 218 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 218 hourly samples

Chart showing grouped wave observations for Fanø Bugt. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Fanø Bugt wave buoy

Fanø Bugt is a Danish Coastal Authority directional buoy in the eastern North Sea southwest of Esbjerg. Its setting between the open sea, the island of Fanø and the approaches to the Wadden Sea represents conditions relevant to the harbour entrance, tidal inlets and the low-lying southwest Danish coast.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Fanø Bugt wave buoy daily means Dec 2002Last observation shown
Metric
Mean significant wave height (ft)23222232211223321213223QC rejected3222---
Mean average wave height (ft)-------------------------------
Mean maximum wave height (ft)4633335432233563242434584443---
Mean average period (s)3443333333333343344443344344---
Mean zero-crossing period (s)3433333333333343344343343344---
Mean maximum wave period (s)-------------------------------
Mean peak wave directionSSEconcentration 91%SWconcentration 96%WSWconcentration 80%SSEconcentration 85%ENEconcentration 58%ENEconcentration 100%Econcentration 97%Econcentration 97%ENEconcentration 94%Econcentration 99%Econcentration 99%ESEconcentration 85%ESEconcentration 93%SSEconcentration 91%SEconcentration 92%Econcentration 86%NWconcentration 90%WNWconcentration 99%Wconcentration 67%SWconcentration 90%WNWconcentration 100%ESEconcentration 71%SEconcentration 96%SSEconcentration 94%Sconcentration 98%SSWconcentration 100%SWconcentration 95%WSWconcentration 100%---

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Danish Coastal Authority wave-measurement network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List