Skip to content
Surfhog home
Menu

Fanø Bugt wave buoy daily means for Nov 2003

Daily means from the Fanø Bugt wave buoy for Nov 2003, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

242 wave-buoy observations covered all 30 days. Typical wave height was 3 ft (10th–90th percentile 1.3–5.9 ft), while mean average of more than one wave period type was 4.2 seconds (10th–90th percentile 3.1–5.4 seconds). All 724 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3ft
Mean: 3.3 ft
P10–P90: 1.3 — 5.9 ft
Recorded extremes

0.3 — 9.4 ft

Available for 240 of 242 hourly samples

Mean Observed Wave Period

4.2secs
P10–P90: 3.1 — 5.4secs
Recorded extremes

2.3 — 6.7secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 242 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 242 hourly samples

Chart showing grouped wave observations for Fanø Bugt. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Fanø Bugt wave buoy

Fanø Bugt is a Danish Coastal Authority directional buoy in the eastern North Sea southwest of Esbjerg. Its setting between the open sea, the island of Fanø and the approaches to the Wadden Sea represents conditions relevant to the harbour entrance, tidal inlets and the low-lying southwest Danish coast.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Fanø Bugt wave buoy daily means Nov 2003Last observation shown
Metric
Mean significant wave height (ft)25654322222324QC rejected434QC rejected43231243244
Mean average wave height (ft)------------------------------
Mean maximum wave height (ft)381086434443546117671165351475467
Mean average period (s)455544333334445545655443455555
Mean zero-crossing period (s)355544333334345545654442355544
Mean maximum wave period (s)------------------------------
Mean peak wave directionVariableconcentration 26%SWconcentration 96%WSWconcentration 100%WSWconcentration 98%WSWconcentration 100%Sconcentration 87%SEconcentration 63%ESEconcentration 93%SSEconcentration 90%SSEconcentration 96%Sconcentration 99%Sconcentration 99%SWconcentration 95%WSWconcentration 94%WSWconcentration 99%Wconcentration 99%Wconcentration 99%WSWconcentration 100%Wconcentration 100%WSWconcentration 98%SWconcentration 99%SWconcentration 57%WSWconcentration 94%ENEconcentration 91%WSWconcentration 46%WSWconcentration 99%WSWconcentration 99%Wconcentration 98%Wconcentration 91%SWconcentration 97%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Danish Coastal Authority wave-measurement network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List