Skip to content
Surfhog home
Menu

Fanø Bugt wave buoy daily means for Dec 2015

Daily means from the Fanø Bugt wave buoy for Dec 2015, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

903 wave-buoy observations covered 22 of 31 days (71%). Typical wave height was 5 ft (10th–90th percentile 2.2–8.9 ft), while mean average of more than one wave period type was 4.9 seconds (10th–90th percentile 3.6–6.4 seconds). All 2,673 checked values passed quality control. Across 5 comparable years, mean wave height was above the same-month mean of 4.6 ft and mean wave period was above the same-month mean of 4.7 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

5ft
Mean: 5.1 ft
P10–P90: 2.2 — 8.9 ft
Recorded extremes

0.1 — 13.9 ft

Available for 454 of 464 hourly samples

Mean Observed Wave Period

4.9secs
P10–P90: 3.6 — 6.4secs
Recorded extremes

2.6 — 9.4secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 464 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 464 hourly samples

Compared With Previous Decembers

Historical baseline from 7,334 observations across 5 years.

Wave Height
5.1ft
0.5ft above mean
Historical mean 4.626ft
Wave Period
4.9s
0.2s above mean
Historical mean 4.7s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Fanø Bugt. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Fanø Bugt wave buoy

Fanø Bugt is a Danish Coastal Authority directional buoy in the eastern North Sea southwest of Esbjerg. Its setting between the open sea, the island of Fanø and the approaches to the Wadden Sea represents conditions relevant to the harbour entrance, tidal inlets and the low-lying southwest Danish coast.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Fanø Bugt wave buoy daily means Dec 2015Last observation shown
Metric
Mean significant wave height (ft)2640----------23446589879573445
Mean maximum wave height (ft)4960----------356810913161412169125789
Mean average period (s)7565----------33445556656554445
Mean zero-crossing period (s)5554---------333445556656554445
Mean peak wave directionVariableconcentration 21%Wconcentration 93%SWconcentration 61%SEconcentration 66%---------ESEconcentration 66%Sconcentration 45%Sconcentration 96%WSWconcentration 100%WSWconcentration 100%WSWconcentration 100%WSWconcentration 100%WSWconcentration 100%WSWconcentration 99%WSWconcentration 98%WSWconcentration 97%Wconcentration 98%WSWconcentration 98%WSWconcentration 98%SSWconcentration 42%Sconcentration 91%SSWconcentration 99%SWconcentration 93%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List