Skip to content
Surfhog home
Menu

Fanø Bugt wave buoy daily means for Sep 2015

Daily means from the Fanø Bugt wave buoy for Sep 2015, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,406 wave-buoy observations covered all 30 days. Typical wave height was 2.4 ft (10th–90th percentile 0.8–6.2 ft), while mean average of more than one wave period type was 3.9 seconds (10th–90th percentile 2.8–5 seconds). All 4,209 checked values passed quality control. Across 5 comparable years, mean wave height was below the same-month mean of 3.2 ft and mean wave period was below the same-month mean of 4 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.4ft
Mean: 3.1 ft
P10–P90: 0.8 — 6.2 ft
Recorded extremes

0.3 — 9.2 ft

Available for 704 of 706 hourly samples

Mean Observed Wave Period

3.9secs
P10–P90: 2.8 — 5secs
Recorded extremes

2.3 — 5.8secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 706 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 706 hourly samples

Compared With Previous Septembers

Historical baseline from 7,152 observations across 5 years.

Wave Height
3.1ft
0.1ft below mean
Historical mean 3.182ft
Wave Period
3.9s
0.1s below mean
Historical mean 4s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Fanø Bugt. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Fanø Bugt wave buoy

Fanø Bugt is a Danish Coastal Authority directional buoy in the eastern North Sea southwest of Esbjerg. Its setting between the open sea, the island of Fanø and the approaches to the Wadden Sea represents conditions relevant to the harbour entrance, tidal inlets and the low-lying southwest Danish coast.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Fanø Bugt wave buoy daily means Sep 2015Last observation shown
Metric
Mean significant wave height (ft)376565221122226475232414532111
Mean maximum wave height (ft)61210911843123333107128463727854211
Mean average period (s)455554444333335455443444543333
Mean zero-crossing period (s)455454443333335454443444443333
Mean peak wave directionWNWconcentration 83%Wconcentration 100%Wconcentration 100%WSWconcentration 96%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 99%WNWconcentration 87%Econcentration 81%Econcentration 96%SEconcentration 92%Sconcentration 87%Sconcentration 78%SWconcentration 99%SWconcentration 97%SWconcentration 92%WSWconcentration 98%Wconcentration 95%WNWconcentration 100%Wconcentration 91%SWconcentration 99%Wconcentration 99%SWconcentration 99%Wconcentration 99%Wconcentration 100%WNWconcentration 99%WNWconcentration 99%Variableconcentration 23%Wconcentration 70%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List