Skip to content
Surfhog home
Menu

Fanø Bugt wave buoy observations on Fri, Dec 13, 2019

Hourly readings from the Fanø Bugt wave buoy for Fri, Dec 13, 2019, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

48 wave-buoy observations were recorded during the day. Typical wave height was 3.8 ft (10th–90th percentile 3–5.6 ft), while mean average wave period was 4.2 seconds (10th–90th percentile 3.8–4.7 seconds). All 144 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Fanø Bugt. Use the detailed observations table below for the same data in text form.

About Fanø Bugt wave buoy

Fanø Bugt is a Danish Coastal Authority directional buoy in the eastern North Sea southwest of Esbjerg. Its setting between the open sea, the island of Fanø and the approaches to the Wadden Sea represents conditions relevant to the harbour entrance, tidal inlets and the low-lying southwest Danish coast.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; hours run left to right. Times use your device time zone.
Fanø Bugt wave buoy hourly observations Fri, Dec 13, 2019Last observation shown
Metric
Significant wave height (ft)666666655555555554444444444443333333333333333333
Maximum wave height (ft)1299910129101088810881088988876776665665766555556555566
Average period (s)555555554445444454444444444444444444444444444444
Zero-crossing period (s)454444444444444444444444444444444434344444444443
Peak wave directionSWSWSWSWSWSWSWSWSSWSSWSSWSSSWSSWSSWSSSSESSWSWSSSESSWSSWSSSESEWSWWSWWSWSWWSWWSWSWSWSWSSESWSSSWSWSSWSSWSSWSSWSSSW

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List