Skip to content
Surfhog home
Menu

Fanø Bugt wave buoy daily means for Oct 2024

Daily means from the Fanø Bugt wave buoy for Oct 2024, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,480 wave-buoy observations covered all 31 days. Typical wave height was 3.2 ft (10th–90th percentile 1.1–5.8 ft), while mean average wave period was 4 seconds (10th–90th percentile 2.9–5 seconds). All 4,440 checked values passed quality control. Across 13 comparable years, mean wave height was below the same-month mean of 3.5 ft and mean wave period was below the same-month mean of 4.2 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.2ft
Mean: 3.4 ft
P10–P90: 1.1 — 5.8 ft
Recorded extremes

0.7 — 12.5 ft

Mean Observed Wave Period

4secs
P10–P90: 2.9 — 5secs
Recorded extremes

2.3 — 7.1secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 745 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 745 hourly samples

Compared With Previous Octobers

Historical baseline from 18,122 observations across 13 years.

Wave Height
3.4ft
0.1ft below mean
Historical mean 3.543ft
Wave Period
4s
0.2s below mean
Historical mean 4.2s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Fanø Bugt. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Fanø Bugt wave buoy

Fanø Bugt is a Danish Coastal Authority directional buoy in the eastern North Sea southwest of Esbjerg. Its setting between the open sea, the island of Fanø and the approaches to the Wadden Sea represents conditions relevant to the harbour entrance, tidal inlets and the low-lying southwest Danish coast.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Fanø Bugt wave buoy daily means Oct 2024Last observation shown
Metric
Mean significant wave height (ft)4221134345557424311485432135335
Mean average wave height (ft)-------------------------------
Mean maximum wave height (ft)632124656888126365227127653257458
Mean average period (s)3334334445555444443465443345545
Mean zero-crossing period (s)3334334444445443333464443345444
Mean maximum wave period (s)-------------------------------
Mean peak wave directionEconcentration 96%NNEconcentration 97%NNWconcentration 92%WNWconcentration 99%SSWconcentration 73%SSWconcentration 93%SSWconcentration 93%SWconcentration 87%WSWconcentration 100%Wconcentration 91%Wconcentration 99%WSWconcentration 94%WSWconcentration 94%WNWconcentration 99%Wconcentration 62%SSEconcentration 98%SSWconcentration 98%SSWconcentration 75%Sconcentration 81%SWconcentration 97%WSWconcentration 99%WSWconcentration 100%Wconcentration 100%SWconcentration 80%SSWconcentration 99%WSWconcentration 70%WSWconcentration 83%WSWconcentration 98%WSWconcentration 98%Wconcentration 99%Wconcentration 100%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Danish Coastal Authority wave-measurement network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List