Skip to content
Surfhog home
Menu

Fjaltring wave buoy daily means for Feb 1994

Daily means from the Fjaltring wave buoy for Feb 1994, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

224 wave-buoy observations covered all 28 days. Typical wave height was 2.1 ft (10th–90th percentile 1.1–4.7 ft), while mean average of more than one wave period type was 4.2 seconds (10th–90th percentile 3.1–5.5 seconds). All 657 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.1ft
Mean: 2.5 ft
P10–P90: 1.1 — 4.7 ft
Recorded extremes

0.7 — 10.7 ft

Available for 216 of 219 hourly samples

Mean Observed Wave Period

4.2secs
P10–P90: 3.1 — 5.5secs
Recorded extremes

2.6 — 6.8secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 219 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 219 hourly samples

Chart showing grouped wave observations for Fjaltring. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Fjaltring wave buoy

Fjaltring is a Danish Coastal Authority directional buoy off the exposed central west coast of Jutland. The authority has maintained a continuous wave-measurement programme here since 1980, creating a key reference for Denmark's most erosion-prone coast and the long-running Lodbjerg–Nymindegab protection works.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Fjaltring wave buoy daily means Feb 1994Last observation shown
Metric
Mean significant wave height (ft)QC rejectedQC rejected42222245211233211232222233
Mean average wave height (ft)----------------------------
Mean maximum wave height (ft)81364433478322355322354334445
Mean average period (s)5653444556533344444444434444
Mean zero-crossing period (s)5653344546533344444344434444
Mean maximum wave period (s)----------------------------
Mean peak wave directionWconcentration 81%Wconcentration 92%NWconcentration 97%Nconcentration 35%WSWconcentration 60%NNWconcentration 70%NWconcentration 93%NWconcentration 94%WSWconcentration 88%WNWconcentration 94%NWconcentration 99%NWconcentration 80%NWconcentration 78%Variableconcentration 23%SSWconcentration 55%SWconcentration 99%SWconcentration 90%NWconcentration 77%NWconcentration 95%NWconcentration 95%Nconcentration 97%NNWconcentration 97%NNWconcentration 99%Wconcentration 69%NWconcentration 100%NWconcentration 85%NNWconcentration 93%Nconcentration 100%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Danish Coastal Authority wave-measurement network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List