Skip to content
Surfhog home
Menu

Fjaltring wave buoy daily means for Feb 2013

Daily means from the Fjaltring wave buoy for Feb 2013, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,344 wave-buoy observations covered all 28 days. Typical wave height was 2.1 ft (10th–90th percentile 1.1–6.3 ft), while mean average wave period was 4.8 seconds (10th–90th percentile 3.5–6.2 seconds). All 3,931 checked values passed quality control. Across 3 comparable years, mean wave height was below the same-month mean of 3.8 ft and mean wave period was below the same-month mean of 5 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.1ft
Mean: 3.1 ft
P10–P90: 1.1 — 6.3 ft
Recorded extremes

0.5 — 12.5 ft

Mean Observed Wave Period

4.8secs
P10–P90: 3.5 — 6.2secs
Recorded extremes

2.9 — 8.1secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 672 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 672 hourly samples

Compared With Previous Februarys

Historical baseline from 4,069 observations across 3 years.

Wave Height
3.1ft
0.7ft below mean
Historical mean 3.839ft
Wave Period
4.8s
0.2s below mean
Historical mean 5s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Fjaltring. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Fjaltring wave buoy

Fjaltring is a Danish Coastal Authority directional buoy off the exposed central west coast of Jutland. The authority has maintained a continuous wave-measurement programme here since 1980, creating a key reference for Denmark's most erosion-prone coast and the long-running Lodbjerg–Nymindegab protection works.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Fjaltring wave buoy daily means Feb 2013Last observation shown
Metric
Mean significant wave height (ft)5669854322222QC rejected31133211122135
Mean maximum wave height (ft)81011151497533333852265311233269
Mean average period (s)6656766555444556444445434565
Mean zero-crossing period (s)6556665444444555344334434455
Mean peak wave directionWSWconcentration 100%WNWconcentration 94%WNWconcentration 93%WNWconcentration 98%WNWconcentration 100%WNWconcentration 97%NWconcentration 100%NWconcentration 99%NWconcentration 99%NWconcentration 65%SWconcentration 89%NWconcentration 88%NWconcentration 83%SWconcentration 97%WSWconcentration 89%NWconcentration 100%WNWconcentration 72%WNWconcentration 99%NNWconcentration 90%Nconcentration 100%NWconcentration 94%NWconcentration 99%NWconcentration 97%NNWconcentration 96%Nconcentration 100%NWconcentration 96%NWconcentration 100%NWconcentration 100%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List