Skip to content
Surfhog home
Menu

Fjaltring wave buoy daily means for Oct 2015

Daily means from the Fjaltring wave buoy for Oct 2015, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,490 wave-buoy observations covered all 31 days. Typical wave height was 2.1 ft (10th–90th percentile 1.2–5.6 ft), while mean average of more than one wave period type was 4.2 seconds (10th–90th percentile 3.1–5.6 seconds). All 4,467 checked values passed quality control. Across 5 comparable years, mean wave height was below the same-month mean of 4.8 ft and mean wave period was below the same-month mean of 4.9 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.1ft
Mean: 2.9 ft
P10–P90: 1.2 — 5.6 ft
Recorded extremes

0.7 — 15.4 ft

Mean Observed Wave Period

4.2secs
P10–P90: 3.1 — 5.6secs
Recorded extremes

2.6 — 7.6secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 745 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 745 hourly samples

Compared With Previous Octobers

Historical baseline from 5,760 observations across 5 years.

Wave Height
2.9ft
1.9ft below mean
Historical mean 4.757ft
Wave Period
4.2s
0.7s below mean
Historical mean 4.9s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Fjaltring. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Fjaltring wave buoy

Fjaltring is a Danish Coastal Authority directional buoy off the exposed central west coast of Jutland. The authority has maintained a continuous wave-measurement programme here since 1980, creating a key reference for Denmark's most erosion-prone coast and the long-running Lodbjerg–Nymindegab protection works.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Fjaltring wave buoy daily means Oct 2015Last observation shown
Metric
Mean significant wave height (ft)4432223331111222222247867422234
Mean maximum wave height (ft)88633454522223344334813141012743346
Mean average period (s)4566434443333444445445655543345
Mean zero-crossing period (s)4465433443333344444345655543344
Mean peak wave directionNWconcentration 100%NWconcentration 98%NWconcentration 99%NWconcentration 100%WNWconcentration 78%SSEconcentration 57%SSWconcentration 74%SWconcentration 96%Wconcentration 91%SWconcentration 85%Wconcentration 43%Sconcentration 70%NNWconcentration 61%NWconcentration 94%NWconcentration 100%NNWconcentration 93%NNWconcentration 95%NNWconcentration 98%NWconcentration 99%NWconcentration 100%Wconcentration 91%WSWconcentration 96%WNWconcentration 99%WSWconcentration 96%Wconcentration 93%WNWconcentration 94%WSWconcentration 74%Wconcentration 42%SWconcentration 91%SWconcentration 97%SWconcentration 100%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List