Skip to content
Surfhog home
Menu

Fjaltring wave buoy daily means for Nov 2017

Daily means from the Fjaltring wave buoy for Nov 2017, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,439 wave-buoy observations covered all 30 days. Typical wave height was 5.7 ft (10th–90th percentile 3.3–9.6 ft), while mean average wave period was 5.5 seconds (10th–90th percentile 4.6–6.3 seconds). All 4,316 checked values passed quality control. Across 6 comparable years, mean wave height was above the same-month mean of 4.5 ft and mean wave period was above the same-month mean of 4.9 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

5.7ft
Mean: 6.2 ft
P10–P90: 3.3 — 9.6 ft
Recorded extremes

1.8 — 14.8 ft

Mean Observed Wave Period

5.5secs
P10–P90: 4.6 — 6.3secs
Recorded extremes

3.6 — 7.4secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 720 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 720 hourly samples

Compared With Previous Novembers

Historical baseline from 8,192 observations across 6 years.

Wave Height
6.2ft
1.7ft above mean
Historical mean 4.495ft
Wave Period
5.5s
0.6s above mean
Historical mean 4.9s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Fjaltring. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Fjaltring wave buoy

Fjaltring is a Danish Coastal Authority directional buoy off the exposed central west coast of Jutland. The authority has maintained a continuous wave-measurement programme here since 1980, creating a key reference for Denmark's most erosion-prone coast and the long-running Lodbjerg–Nymindegab protection works.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Fjaltring wave buoy daily means Nov 2017Last observation shown
Metric
Mean significant wave height (ft)6755555371097565591110526107697533
Mean maximum wave height (ft)1012898986121915129118915181694101712111512865
Mean average period (s)555555555666655566755566666666
Mean zero-crossing period (s)555555555665655566654566565665
Mean peak wave directionWSWconcentration 99%WNWconcentration 97%WNWconcentration 91%WSWconcentration 99%Wconcentration 93%WNWconcentration 99%Wconcentration 95%Wconcentration 90%WSWconcentration 88%WNWconcentration 98%WNWconcentration 100%WNWconcentration 100%NWconcentration 100%Wconcentration 96%WNWconcentration 97%Wconcentration 83%WNWconcentration 98%WNWconcentration 99%NWconcentration 100%NWconcentration 100%Wconcentration 87%SWconcentration 97%WSWconcentration 100%Wconcentration 94%WNWconcentration 98%WNWconcentration 99%Wconcentration 91%WNWconcentration 92%NWconcentration 100%WNWconcentration 100%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List