Skip to content
Surfhog home
Menu

Fjaltring wave buoy observations on Fri, Sep 6, 2019

Hourly readings from the Fjaltring wave buoy for Fri, Sep 6, 2019, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

48 wave-buoy observations were recorded during the day. Typical wave height was 6.9 ft (10th–90th percentile 5.6–7.6 ft), while mean average wave period was 5.5 seconds (10th–90th percentile 5–5.8 seconds). All 144 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Fjaltring. Use the detailed observations table below for the same data in text form.

About Fjaltring wave buoy

Fjaltring is a Danish Coastal Authority directional buoy off the exposed central west coast of Jutland. The authority has maintained a continuous wave-measurement programme here since 1980, creating a key reference for Denmark's most erosion-prone coast and the long-running Lodbjerg–Nymindegab protection works.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; hours run left to right. Times use your device time zone.
Fjaltring wave buoy hourly observations Fri, Sep 6, 2019Last observation shown
Metric
Significant wave height (ft)877777666666666556566666677878989888777777777776
Maximum wave height (ft)13131014111110111011101010101098109101110109121212131216151416131414131113111111101212131311
Average period (s)666666666555555555555555555556666666666666666666
Zero-crossing period (s)666555555555555555555555555555566566566555556555
Peak wave directionWNWWNWNWNWNWNWNWWNWNWWNWWNWNWWNWWNWWNWWNWWNWWNWWNWWWNWWWSWWSWWSWWSWWSWWSWWSWWSWWSWWSWWSWWSWWSWWWWWWSWWWWWSWWWWSWW

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List