Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Oct 1999

Daily means from the Nymindegab wave buoy for Oct 1999, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

242 wave-buoy observations covered all 31 days. Typical wave height was 4.6 ft (10th–90th percentile 1.5–8.3 ft), while mean average of more than one wave period type was 4.6 seconds (10th–90th percentile 3.3–5.8 seconds). 1 of 725 checked values (0.1%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

4.6ft
Mean: 4.8 ft
P10–P90: 1.5 — 8.3 ft
Recorded extremes

0.6 — 13 ft

Available for 240 of 242 hourly samples

Mean Observed Wave Period

4.6secs
P10–P90: 3.3 — 5.8secs
Recorded extremes

2.7 — 6.9secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 242 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 242 hourly samples

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Oct 1999Last observation shown
Metric
Mean significant wave height (ft)77787425758116621212234334666447
Mean average wave height (ft)-------------------------------
Mean maximum wave height (ft)121211141274811813181010423234575561010108611
Mean average period (s)5656654555565543344344444555545
Mean zero-crossing period (s)5556554455565543333334444555545
Mean maximum wave period (s)-------------------------------
Mean peak wave directionWconcentration 99%WSWconcentration 99%WSWconcentration 100%WNWconcentration 96%NWconcentration 100%NWconcentration 100%NNWconcentration 99%Wconcentration 94%WNWconcentration 97%Wconcentration 93%WNWconcentration 96%NWconcentration 100%NWconcentration 99%NWconcentration 100%NWconcentration 99%NWconcentration 87%Nconcentration 72%NNWconcentration 71%NWconcentration 99%Variableconcentration 29%ESEconcentration 98%SEconcentration 97%Sconcentration 70%SWconcentration 99%WSWconcentration 99%WSWconcentration 97%WNWconcentration 96%Wconcentration 99%WNWconcentration 98%WSWconcentration 63%WSWconcentration 91%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Danish Coastal Authority wave-measurement network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List