Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Aug 1999

Daily means from the Nymindegab wave buoy for Aug 1999, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

168 wave-buoy observations covered 23 of 31 days (74%). Typical wave height was 2.7 ft (10th–90th percentile 1.2–6.3 ft), while mean average wave period was 4.3 seconds (10th–90th percentile 3.2–5.3 seconds). 1 of 502 checked values (0.2%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.7ft
Mean: 3.2 ft
P10–P90: 1.2 — 6.3 ft
Recorded extremes

0.4 — 8.1 ft

Available for 167 of 168 hourly samples

Mean Observed Wave Period

4.3secs
P10–P90: 3.2 — 5.3secs
Recorded extremes

2.4 — 6.2secs

Available for 167 of 168 hourly samples

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 168 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 168 hourly samples

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Aug 1999Last observation shown
Metric
Mean significant wave height (ft)---1112124753433223476432------
Mean average wave height (ft)-------------------------------
Mean maximum wave height (ft)---1124237129475534461110653------
Mean average period (s)---3334455554444544555454------
Mean zero-crossing period (s)---3234355554444434455443------
Mean maximum wave period (s)-------------------------------
Mean peak wave direction---ESEconcentration 62%ENEconcentration 44%Wconcentration 65%NNWconcentration 100%NNWconcentration 74%NWconcentration 99%NWconcentration 92%NWconcentration 100%NWconcentration 100%NWconcentration 100%SWconcentration 95%WSWconcentration 98%WSWconcentration 100%Wconcentration 99%SSWconcentration 77%WSWconcentration 80%NWconcentration 96%NWconcentration 100%NNWconcentration 100%NNWconcentration 100%NNWconcentration 100%Variableconcentration 8%-----Wconcentration 100%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Danish Coastal Authority wave-measurement network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List