Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Nov 2002

Daily means from the Nymindegab wave buoy for Nov 2002, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

236 wave-buoy observations covered all 30 days. Typical wave height was 2.5 ft (10th–90th percentile 1.5–4.3 ft), while mean average of more than one wave period type was 4.2 seconds (10th–90th percentile 3.3–5.2 seconds). All 701 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.5ft
Mean: 2.7 ft
P10–P90: 1.5 — 4.3 ft
Recorded extremes

1 — 6.7 ft

Available for 232 of 236 hourly samples

Mean Observed Wave Period

4.2secs
P10–P90: 3.3 — 5.2secs
Recorded extremes

2.9 — 5.9secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 236 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 236 hourly samples

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Nov 2002Last observation shown
Metric
Mean significant wave height (ft)324225344234443222212322232322
Mean average wave height (ft)------------------------------
Mean maximum wave height (ft)546449676347765234324543344634
Mean average period (s)534445555445555445443454444444
Mean zero-crossing period (s)534344555434555345343444344444
Mean maximum wave period (s)------------------------------
Mean peak wave directionNWconcentration 100%Econcentration 89%SEconcentration 90%SSEconcentration 42%Wconcentration 53%SWconcentration 96%WSWconcentration 90%WNWconcentration 95%NWconcentration 90%NNEconcentration 49%Variableconcentration 24%SWconcentration 94%Wconcentration 92%WNWconcentration 89%Wconcentration 96%NWconcentration 55%NWconcentration 98%NWconcentration 92%NWconcentration 99%NWconcentration 51%ESEconcentration 96%Econcentration 98%NWconcentration 94%NWconcentration 86%NWconcentration 93%NNWconcentration 100%WSWconcentration 71%SWconcentration 93%Wconcentration 88%NNWconcentration 78%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Danish Coastal Authority wave-measurement network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List