Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Nov 2004

Daily means from the Nymindegab wave buoy for Nov 2004, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

245 wave-buoy observations covered all 30 days. Typical wave height was 4.4 ft (10th–90th percentile 2.4–9.7 ft), while mean average of more than one wave period type was 5.1 seconds (10th–90th percentile 3.8–6.3 seconds). 2 of 732 checked values (0.3%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

4.4ft
Mean: 5.5 ft
P10–P90: 2.4 — 9.7 ft
Recorded extremes

1.4 — 19.3 ft

Available for 242 of 245 hourly samples

Mean Observed Wave Period

5.1secs
P10–P90: 3.8 — 6.3secs
Recorded extremes

2.9 — 9secs

Available for 243 of 245 hourly samples

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 245 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 245 hourly samples

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Nov 2004Last observation shown
Metric
Mean significant wave height (ft)3234QC rejectedQC rejected33234911796514585974445333
Mean average wave height (ft)------------------------------
Mean maximum wave height (ft)54571612454571418111410822812815126879556
Mean average period (s)554466544446756557565664555554
Mean zero-crossing period (s)443466443445656557564564445554
Mean maximum wave period (s)------------------------------
Mean peak wave directionNWconcentration 99%NWconcentration 100%SSWconcentration 58%WSWconcentration 97%WNWconcentration 97%NWconcentration 100%NWconcentration 100%WSWconcentration 77%WSWconcentration 48%NNWconcentration 93%Wconcentration 64%Wconcentration 97%NWconcentration 99%NWconcentration 98%WNWconcentration 99%WNWconcentration 100%Wconcentration 63%NWconcentration 86%NWconcentration 100%NWconcentration 100%NWconcentration 91%Wconcentration 92%NWconcentration 99%Wconcentration 72%WSWconcentration 100%WSWconcentration 99%WNWconcentration 96%WNWconcentration 90%NWconcentration 96%WNWconcentration 80%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Danish Coastal Authority wave-measurement network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List