Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Mar 2011

Daily means from the Nymindegab wave buoy for Mar 2011, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,486 wave-buoy observations covered all 31 days. Typical wave height was 3 ft (10th–90th percentile 1.6–6 ft), while mean average wave period was 4.9 seconds (10th–90th percentile 3.5–6.3 seconds). All 4,458 checked values passed quality control. Across 1 comparable year, mean wave height was above the same-month mean of 3.2 ft and mean wave period was above the same-month mean of 4.5 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3ft
Mean: 3.4 ft
P10–P90: 1.6 — 6 ft
Recorded extremes

1.1 — 13.9 ft

Mean Observed Wave Period

4.9secs
P10–P90: 3.5 — 6.3secs
Recorded extremes

2.9 — 10.6secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 743 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 743 hourly samples

Compared With Previous Marchs

Historical baseline from 1,486 observations across 1 year.

Wave Height
3.4ft
0.2ft above mean
Historical mean 3.215ft
Wave Period
4.9s
0.4s above mean
Historical mean 4.5s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Mar 2011Last observation shown
Metric
Mean significant wave height (ft)2223542469752223223334344335423
Mean maximum wave height (ft)23351064610161383344345466677558645
Mean average period (s)7784554456655643455445455545454
Mean zero-crossing period (s)7784554456655543454444444544443
Mean peak wave directionNWconcentration 100%NWconcentration 100%NWconcentration 100%NWconcentration 99%NWconcentration 99%NWconcentration 100%Wconcentration 68%WSWconcentration 84%Wconcentration 96%WNWconcentration 97%WNWconcentration 99%Wconcentration 97%NWconcentration 99%NWconcentration 98%ENEconcentration 57%ENEconcentration 46%NWconcentration 100%NWconcentration 98%WNWconcentration 100%NWconcentration 91%Wconcentration 96%WNWconcentration 96%WNWconcentration 99%NWconcentration 99%NWconcentration 100%NWconcentration 100%WNWconcentration 93%NWconcentration 97%WNWconcentration 97%NWconcentration 77%SWconcentration 76%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List