Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Sep 2011

Daily means from the Nymindegab wave buoy for Sep 2011, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,439 wave-buoy observations covered all 30 days. Typical wave height was 3.3 ft (10th–90th percentile 1.4–8.2 ft), while mean average wave period was 4.5 seconds (10th–90th percentile 3.4–5.6 seconds). All 4,316 checked values passed quality control. Across 1 comparable year, mean wave height was above the same-month mean of 3.9 ft and mean wave period was above the same-month mean of 4.3 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.3ft
Mean: 4.3 ft
P10–P90: 1.4 — 8.2 ft
Recorded extremes

0.7 — 12.7 ft

Mean Observed Wave Period

4.5secs
P10–P90: 3.4 — 5.6secs
Recorded extremes

2.8 — 7.1secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 720 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 720 hourly samples

Compared With Previous Septembers

Historical baseline from 1,440 observations across 1 year.

Wave Height
4.3ft
0.4ft above mean
Historical mean 3.904ft
Wave Period
4.5s
0.2s above mean
Historical mean 4.3s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Sep 2011Last observation shown
Metric
Mean significant wave height (ft)4222379642371188433455763233311
Mean maximum wave height (ft)733351315116461220141475588813105355521
Mean average period (s)543445655445666544455554445444
Mean zero-crossing period (s)443345555445655534444554344433
Mean peak wave directionNWconcentration 100%WNWconcentration 63%SWconcentration 81%WNWconcentration 84%Wconcentration 79%SWconcentration 99%Wconcentration 96%WNWconcentration 99%WNWconcentration 99%Wconcentration 78%SWconcentration 97%SWconcentration 99%Wconcentration 98%Wconcentration 100%WNWconcentration 98%NWconcentration 100%Sconcentration 76%WSWconcentration 99%SWconcentration 96%WSWconcentration 99%WSWconcentration 94%Wconcentration 98%WNWconcentration 99%Wconcentration 97%WSWconcentration 97%WSWconcentration 93%WNWconcentration 90%Wconcentration 99%WNWconcentration 89%NWconcentration 98%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List