Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Jun 2012

Daily means from the Nymindegab wave buoy for Jun 2012, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,056 wave-buoy observations covered 23 of 30 days (77%). Typical wave height was 3.4 ft (10th–90th percentile 1.4–7 ft), while mean average wave period was 4.3 seconds (10th–90th percentile 3.1–5.3 seconds). All 3,166 checked values passed quality control. Across 2 comparable years, mean wave height was above the same-month mean of 3 ft and mean wave period was above the same-month mean of 4.2 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.4ft
Mean: 3.8 ft
P10–P90: 1.4 — 7 ft
Recorded extremes

0.7 — 9.4 ft

Mean Observed Wave Period

4.3secs
P10–P90: 3.1 — 5.3secs
Recorded extremes

2.6 — 6.1secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 529 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 529 hourly samples

Compared With Previous Junes

Historical baseline from 2,856 observations across 2 years.

Wave Height
3.8ft
0.8ft above mean
Historical mean 2.986ft
Wave Period
4.3s
0.1s above mean
Historical mean 4.2s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Jun 2012Last observation shown
Metric
Mean significant wave height (ft)8656532-------3353111364574233
Mean maximum wave height (ft)13101011943-------558532251079136355
Mean average period (s)5555543-------4444333455555434
Mean zero-crossing period (s)5555543-------3444333354454434
Mean peak wave directionNNWconcentration 100%NNWconcentration 100%NWconcentration 100%NWconcentration 100%NWconcentration 100%WSWconcentration 73%SSWconcentration 95%-------Sconcentration 70%SWconcentration 97%SWconcentration 100%Wconcentration 88%WNWconcentration 97%NWconcentration 81%Econcentration 58%SSWconcentration 76%WSWconcentration 96%Wconcentration 98%Wconcentration 95%NWconcentration 100%NNWconcentration 100%NNWconcentration 81%SSWconcentration 84%WSWconcentration 100%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List