Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Jan 2014

Daily means from the Nymindegab wave buoy for Jan 2014, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,488 wave-buoy observations covered all 31 days. Typical wave height was 3.9 ft (10th–90th percentile 2.5–6.6 ft), while mean average of more than one wave period type was 4.3 seconds (10th–90th percentile 3.5–5.4 seconds). All 4,420 checked values passed quality control. Across 4 comparable years, mean wave height was above the same-month mean of 4.2 ft and mean wave period was below the same-month mean of 4.6 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.9ft
Mean: 4.3 ft
P10–P90: 2.5 — 6.6 ft
Recorded extremes

1.8 — 11.5 ft

Mean Observed Wave Period

4.3secs
P10–P90: 3.5 — 5.4secs
Recorded extremes

2.9 — 13secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 744 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 744 hourly samples

Compared With Previous Januarys

Historical baseline from 5,899 observations across 4 years.

Wave Height
4.3ft
0.1ft above mean
Historical mean 4.167ft
Wave Period
4.3s
0.3s below mean
Historical mean 4.6s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Jan 2014Last observation shown
Metric
Mean significant wave height (ft)4456456667784334334323545444322
Mean maximum wave height (ft)87811691110111311146567658546879867544
Mean average period (s)4455455555564544444444444454333
Mean zero-crossing period (s)4445455555564444444343444444333
Mean peak wave directionSWconcentration 97%SWconcentration 94%SWconcentration 97%WSWconcentration 98%WSWconcentration 99%SWconcentration 99%SWconcentration 99%WSWconcentration 99%Wconcentration 92%WNWconcentration 100%Wconcentration 97%NWconcentration 100%SWconcentration 60%WNWconcentration 82%SWconcentration 55%Sconcentration 78%SSWconcentration 70%SSEconcentration 49%ESEconcentration 99%Econcentration 87%Nconcentration 85%ESEconcentration 61%SSEconcentration 95%SEconcentration 98%Sconcentration 98%SEconcentration 88%SWconcentration 59%SSEconcentration 74%ESEconcentration 85%SEconcentration 98%SSEconcentration 81%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List