Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Nov 2014

Daily means from the Nymindegab wave buoy for Nov 2014, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,440 wave-buoy observations covered all 30 days. Typical wave height was 2.9 ft (10th–90th percentile 1.8–5.2 ft), while mean average of more than one wave period type was 4 seconds (10th–90th percentile 3.3–5 seconds). All 4,314 checked values passed quality control. Across 4 comparable years, mean wave height was below the same-month mean of 4.4 ft and mean wave period was below the same-month mean of 4.7 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.9ft
Mean: 3.1 ft
P10–P90: 1.8 — 5.2 ft
Recorded extremes

0.8 — 9.4 ft

Mean Observed Wave Period

4secs
P10–P90: 3.3 — 5secs
Recorded extremes

2.6 — 6.3secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 720 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 720 hourly samples

Compared With Previous Novembers

Historical baseline from 5,730 observations across 4 years.

Wave Height
3.1ft
1.3ft below mean
Historical mean 4.429ft
Wave Period
4s
0.7s below mean
Historical mean 4.7s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Nov 2014Last observation shown
Metric
Mean significant wave height (ft)35632246444222333221133QC rejected423332
Mean maximum wave height (ft)591054471076643456544324511646654
Mean average period (s)455554454544533443343345544433
Mean zero-crossing period (s)445444454443433343343345544333
Mean peak wave directionWSWconcentration 99%WSWconcentration 99%SWconcentration 99%WSWconcentration 96%NWconcentration 99%NNWconcentration 100%SWconcentration 90%SWconcentration 98%WSWconcentration 100%Wconcentration 73%SWconcentration 76%Econcentration 32%WNWconcentration 87%Wconcentration 47%ESEconcentration 99%Econcentration 93%NNEconcentration 63%Nconcentration 88%NNWconcentration 95%NNWconcentration 96%NNWconcentration 83%Sconcentration 87%SSWconcentration 91%WNWconcentration 98%WNWconcentration 100%NWconcentration 39%SSEconcentration 92%SEconcentration 97%SEconcentration 95%SEconcentration 94%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List