Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Aug 2015

Daily means from the Nymindegab wave buoy for Aug 2015, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,481 wave-buoy observations covered all 31 days. Typical wave height was 1.9 ft (10th–90th percentile 1–3.8 ft), while mean average of more than one wave period type was 3.8 seconds (10th–90th percentile 2.9–4.6 seconds). All 4,430 checked values passed quality control. Across 5 comparable years, mean wave height was below the same-month mean of 3.4 ft and mean wave period was below the same-month mean of 4.2 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1.9ft
Mean: 2.2 ft
P10–P90: 1 — 3.8 ft
Recorded extremes

0.6 — 9.7 ft

Mean Observed Wave Period

3.8secs
P10–P90: 2.9 — 4.6secs
Recorded extremes

2.5 — 8.7secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 741 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 741 hourly samples

Compared With Previous Augusts

Historical baseline from 5,522 observations across 5 years.

Wave Height
2.2ft
1.2ft below mean
Historical mean 3.379ft
Wave Period
3.8s
0.4s below mean
Historical mean 4.2s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Aug 2015Last observation shown
Metric
Mean significant wave height (ft)3221211221122223232111225544322
Mean maximum wave height (ft)5332421332243435453222349987643
Mean average period (s)4433433344444364444433334544443
Mean zero-crossing period (s)4333333334344364334433334544443
Mean peak wave directionWconcentration 77%WSWconcentration 99%Sconcentration 70%SWconcentration 89%SWconcentration 99%SSWconcentration 87%SWconcentration 95%WNWconcentration 90%WNWconcentration 80%WNWconcentration 88%NWconcentration 100%WNWconcentration 98%NNWconcentration 99%ESEconcentration 54%NWconcentration 100%WNWconcentration 98%Nconcentration 50%Econcentration 62%WSWconcentration 62%WSWconcentration 99%Sconcentration 89%Sconcentration 68%ESEconcentration 98%ESEconcentration 93%SSWconcentration 81%WSWconcentration 95%SWconcentration 99%WSWconcentration 98%WSWconcentration 99%Wconcentration 95%NNWconcentration 82%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List