Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Aug 2016

Daily means from the Nymindegab wave buoy for Aug 2016, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,482 wave-buoy observations covered all 31 days. Typical wave height was 3.4 ft (10th–90th percentile 1.3–6.5 ft), while mean average wave period was 4.3 seconds (10th–90th percentile 3.4–5.1 seconds). All 4,442 checked values passed quality control. Across 6 comparable years, mean wave height was above the same-month mean of 3.1 ft and mean wave period was above the same-month mean of 4.1 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.4ft
Mean: 3.8 ft
P10–P90: 1.3 — 6.5 ft
Recorded extremes

0.6 — 10.4 ft

Mean Observed Wave Period

4.3secs
P10–P90: 3.4 — 5.1secs
Recorded extremes

2.5 — 6.7secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 744 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 744 hourly samples

Compared With Previous Augusts

Historical baseline from 7,003 observations across 6 years.

Wave Height
3.8ft
0.7ft above mean
Historical mean 3.117ft
Wave Period
4.3s
0.2s above mean
Historical mean 4.1s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Aug 2016Last observation shown
Metric
Mean significant wave height (ft)4335455898446542221244211232QC rejected43
Mean maximum wave height (ft)8669710915161477109743424774224441075
Mean average period (s)5545454666545544444344433443544
Mean zero-crossing period (s)4544454565445444344344433443544
Mean peak wave directionNWconcentration 99%NWconcentration 100%SWconcentration 65%WSWconcentration 98%Wconcentration 98%NWconcentration 98%WSWconcentration 83%Wconcentration 95%NWconcentration 99%NWconcentration 100%NWconcentration 77%WSWconcentration 100%WNWconcentration 99%WNWconcentration 100%NWconcentration 100%NNWconcentration 99%NWconcentration 97%NNWconcentration 99%NNWconcentration 96%Sconcentration 84%SWconcentration 99%Wconcentration 94%WSWconcentration 99%SSWconcentration 82%NWconcentration 74%Wconcentration 78%WNWconcentration 99%Sconcentration 45%NWconcentration 95%WNWconcentration 93%Wconcentration 99%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List