Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Nov 2019

Daily means from the Nymindegab wave buoy for Nov 2019, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,432 wave-buoy observations covered all 30 days. Typical wave height was 2.8 ft (10th–90th percentile 1.7–5.6 ft), while mean average of more than one wave period type was 4.3 seconds (10th–90th percentile 3.3–5.3 seconds). All 4,284 checked values passed quality control. Across 8 comparable years, mean wave height was below the same-month mean of 4.4 ft and mean wave period was below the same-month mean of 4.6 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

2.8ft
Mean: 3.2 ft
P10–P90: 1.7 — 5.6 ft
Recorded extremes

1.2 — 8 ft

Mean Observed Wave Period

4.3secs
P10–P90: 3.3 — 5.3secs
Recorded extremes

2.8 — 6.9secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 717 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 717 hourly samples

Compared With Previous Novembers

Historical baseline from 10,869 observations across 8 years.

Wave Height
3.2ft
1.2ft below mean
Historical mean 4.364ft
Wave Period
4.3s
0.3s below mean
Historical mean 4.6s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Nov 2019Last observation shown
Metric
Mean significant wave height (ft)334432242246533344632222223465
Mean average wave height (ft)------------------------------
Mean maximum wave height (ft)557664364471085558611434443447119
Mean average period (s)445444454445544555554333344565
Mean zero-crossing period (s)345444454445543554553333334555
Mean maximum wave period (s)------------------------------
Mean peak wave directionSconcentration 96%SWconcentration 96%Wconcentration 94%NNWconcentration 90%NNWconcentration 100%NNWconcentration 100%NNWconcentration 100%NWconcentration 93%NWconcentration 98%NWconcentration 96%WSWconcentration 75%SWconcentration 97%Wconcentration 77%WNWconcentration 71%NNWconcentration 92%NNWconcentration 96%WSWconcentration 92%NNWconcentration 96%NWconcentration 99%NWconcentration 99%NWconcentration 78%Sconcentration 52%ESEconcentration 74%ESEconcentration 88%SWconcentration 76%SWconcentration 97%WSWconcentration 89%WNWconcentration 77%NWconcentration 100%NWconcentration 100%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Danish Coastal Authority wave-measurement network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List