Skip to content
Surfhog home
Menu

Nymindegab wave buoy daily means for Nov 2020

Daily means from the Nymindegab wave buoy for Nov 2020, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,440 wave-buoy observations covered all 30 days. Typical wave height was 4.6 ft (10th–90th percentile 1.6–8.5 ft), while mean average wave period was 5.1 seconds (10th–90th percentile 3.5–6.2 seconds). All 4,318 checked values passed quality control. Across 9 comparable years, mean wave height was above the same-month mean of 4.2 ft and mean wave period was above the same-month mean of 4.6 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

4.6ft
Mean: 4.9 ft
P10–P90: 1.6 — 8.5 ft
Recorded extremes

1.1 — 14.3 ft

Mean Observed Wave Period

5.1secs
P10–P90: 3.5 — 6.2secs
Recorded extremes

2.8 — 9.1secs

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 720 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 720 hourly samples

Compared With Previous Novembers

Historical baseline from 12,301 observations across 9 years.

Wave Height
4.9ft
0.7ft above mean
Historical mean 4.232ft
Wave Period
5.1s
0.5s above mean
Historical mean 4.6s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Nymindegab. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Nymindegab wave buoy

Nymindegab is a Danish Coastal Authority directional buoy in the North Sea off the southern part of Jutland's exposed west coast. The station supports long-term understanding and management of the sandy barrier coast around the southern end of Ringkøbing Fjord and the Lodbjerg–Nymindegab protection area.

Its current data source reports wave height, wave period and wave direction.

Metrics are rows; days run left to right.
Nymindegab wave buoy daily means Nov 2020Last observation shown
Metric
Mean significant wave height (ft)5877742222234456671168987542224
Mean average wave height (ft)------------------------------
Mean maximum wave height (ft)914121212743333676891113181013161312864436
Mean average period (s)565565563334555555756665545574
Mean zero-crossing period (s)555555553334444555655655544564
Mean maximum wave period (s)------------------------------
Mean peak wave directionWSWconcentration 99%WSWconcentration 99%WSWconcentration 97%Wconcentration 96%WNWconcentration 99%NWconcentration 100%NWconcentration 100%NWconcentration 100%NWconcentration 92%Wconcentration 71%SSWconcentration 80%SWconcentration 97%WSWconcentration 98%WSWconcentration 96%SWconcentration 97%WSWconcentration 98%Wconcentration 99%WSWconcentration 98%WNWconcentration 90%NWconcentration 93%WSWconcentration 99%WNWconcentration 96%WNWconcentration 99%Wconcentration 99%WSWconcentration 99%Wconcentration 89%NWconcentration 100%NWconcentration 100%NWconcentration 100%WSWconcentration 76%

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Danish Coastal Authority wave-measurement network.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List