Skip to content
Surfhog home
Menu

Anglet wave buoy daily means for Jun 2015

Daily means from the Anglet wave buoy for Jun 2015, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,439 wave-buoy observations covered all 30 days. Typical wave height was 3.5 ft (10th–90th percentile 2.2–5.6 ft), while mean peak wave period was 9.2 seconds (10th–90th percentile 5.2–12.3 seconds). Typical calculated wave power was approximately 4.5 kW/m (10th–90th percentile 1.3–12.7 kW/m), derived from significant wave height and energy period. 2 of 4,317 checked values (0%) were excluded by quality control. Across 5 comparable years, mean wave height was below the same-month mean of 4.3 ft and mean wave period was above the same-month mean of 9 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.5ft
Mean: 3.7 ft
P10–P90: 2.2 — 5.6 ft
Recorded extremes

0.8 — 9.4 ft

Mean Observed Wave Period

9.2secs
P10–P90: 5.2 — 12.3secs
Recorded extremes

2.6 — 15.6secs

Typical Wave Power

Approximately 4.5kW/m
Mean: 6.41kW/m
P10–P90: 1.27 — 12.66kW/m
Recorded extremes

0.21 — 48.86kW/m

Calculated from significant wave height and energy period.

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 720 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 720 hourly samples

Compared With Previous Junes

Historical baseline from 6,474 observations across 5 years.

Wave Height
3.7ft
0.6ft below mean
Historical mean 4.298ft
Wave Period
9.2s
0.2s above mean
Historical mean 9s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Anglet. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Anglet wave buoy

Anglet is a CANDHIS directional buoy on the French Basque coast, operated within the national sea-state observatory coordinated by Cerema. It records the highly exposed southern Bay of Biscay setting off Anglet's beaches, close to the Adour estuary and the approaches to Bayonne.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
Anglet wave buoy daily means Jun 2015Last observation shown
Metric
Mean significant wave height (ft)377753545313222534433442334444
Mean maximum wave height (ft)511111175877524434855754664456665
Mean peak period (s)81212121181197775765551111101013119111110101010
Mean average period (s)7111011979767646555588981197998999
Mean period Tm02 (s)698965755654544446665765666677
Mean peak wave directionNWconcentration 100%NWconcentration 100%NWconcentration 100%WNWconcentration 100%WNWconcentration 100%NWconcentration 96%NWconcentration 100%NWconcentration 100%NNWconcentration 97%NNWconcentration 100%NWconcentration 94%WNWconcentration 88%WNWconcentration 98%NWconcentration 96%NWconcentration 97%NWconcentration 99%NWconcentration 100%NWconcentration 97%WNWconcentration 100%NWconcentration 100%NWconcentration 100%WNWconcentration 100%NWconcentration 100%NWconcentration 99%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%
Mean directional spread (°)23.218.718.419.324.625.120.021.322.422.930.525.521.127.527.828.027.424.724.324.325.323.422.225.723.223.621.121.422.322.2
Mean water temperature(°C)------------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Cerema CANDHIS coastal wave observatory.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List