Skip to content
Surfhog home
Menu

Anglet wave buoy observations on Wed, Aug 15, 2018

Hourly readings from the Anglet wave buoy for Wed, Aug 15, 2018, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

48 wave-buoy observations were recorded during the day. Typical wave height was 3.4 ft (10th–90th percentile 2.9–4.4 ft), while mean peak wave period was 8.6 seconds (10th–90th percentile 8.1–9.4 seconds). Typical calculated wave power was approximately 3.9 kW/m (10th–90th percentile 2.2–7 kW/m), derived from significant wave height and energy period. All 144 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Anglet. Use the detailed observations table below for the same data in text form.

About Anglet wave buoy

Anglet is a CANDHIS directional buoy on the French Basque coast, operated within the national sea-state observatory coordinated by Cerema. It records the highly exposed southern Bay of Biscay setting off Anglet's beaches, close to the Adour estuary and the approaches to Bayonne.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; hours run left to right. Times use your device time zone.
Anglet wave buoy hourly observations Wed, Aug 15, 2018Last observation shown
Metric
Significant wave height (ft)455454444444344343433343333333433333333333333333
Maximum wave height (ft)777877777765656555555556655554555546455454444544
Peak period (s)910910991099101099109999999999999988898889999899985585
Average period (s)889888888888888888888888887877776656666555555566
Peak wave directionWNWWNWWNWWNWWNWWNWWNWWNWWNWNWWNWNWWNWWNWWNWWNWNWNWWNWWNWWNWWNWWNWWNWWNWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWNNWNWN
Directional spread (°)24.817.119.621.020.120.925.723.927.927.429.126.028.425.924.627.625.923.722.420.920.819.019.518.320.421.520.021.321.219.019.421.023.725.632.926.926.826.126.132.227.127.431.333.028.927.825.325.6
Water temperature(°C)------------------------------------------------

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List