Skip to content
Surfhog home
Menu

Belle-Île wave buoy daily means for Oct 2012

Daily means from the Belle-Île wave buoy for Oct 2012, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,490 wave-buoy observations covered all 31 days. Typical wave height was 5.7 ft (10th–90th percentile 2.7–9 ft), while mean peak wave period was 9.8 seconds (10th–90th percentile 6.6–13.2 seconds). Typical calculated wave power was approximately 12.4 kW/m (10th–90th percentile 2.2–31.6 kW/m), derived from significant wave height and energy period. 6 of 4,470 checked values (0.1%) were excluded by quality control. Across 2 comparable years, mean wave height was above the same-month mean of 5.5 ft and mean wave period was below the same-month mean of 10.2 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

5.7ft
Mean: 5.8 ft
P10–P90: 2.7 — 9 ft
Recorded extremes

1.4 — 16.9 ft

Mean Observed Wave Period

9.8secs
P10–P90: 6.6 — 13.2secs
Recorded extremes

3.5 — 21.3secs

Typical Wave Power

Approximately 12.39kW/m
Mean: 16.41kW/m
P10–P90: 2.17 — 31.6kW/m
Recorded extremes

0.55 — 155.43kW/m

Calculated from significant wave height and energy period.

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 745 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 745 hourly samples

Compared With Previous Octobers

Historical baseline from 2,135 observations across 2 years.

Wave Height
5.8ft
0.3ft above mean
Historical mean 5.545ft
Wave Period
9.8s
0.4s below mean
Historical mean 10.2s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Belle-Île. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Belle-Île wave buoy

Belle-Île is a CANDHIS directional buoy south of Brittany, maintained through the Cerema-coordinated sea-state observatory and research partners. Its open Atlantic position represents conditions approaching Belle-Île and the sheltered-to-exposed transition along the Morbihan coast.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
Belle-Île wave buoy daily means Oct 2012Last observation shown
Metric
Mean significant wave height (ft)579866756557867912116457423342445
Mean maximum wave height (ft)810131299118108811111011131816106811744454668
Mean peak period (s)91210998109111089109109101211101714131110955698
Mean average period (s)7988779810977888891010914131287755677
Mean period Tm02 (s)566665767756676678871010955544565
Mean peak wave directionWNWconcentration 100%Wconcentration 100%Wconcentration 100%Wconcentration 98%WNWconcentration 99%Wconcentration 100%WSWconcentration 100%WSWconcentration 100%WSWconcentration 100%WSWconcentration 100%Wconcentration 99%WNWconcentration 100%WNWconcentration 100%Wconcentration 97%Wconcentration 99%Wconcentration 92%WSWconcentration 90%Wconcentration 100%Wconcentration 100%Wconcentration 100%Wconcentration 100%Wconcentration 100%Wconcentration 100%Wconcentration 95%WSWconcentration 100%WSWconcentration 83%NNWconcentration 97%WNWconcentration 83%WNWconcentration 93%Wconcentration 97%WSWconcentration 87%
Mean directional spread (°)28.531.530.634.732.330.933.133.932.935.335.031.229.934.433.635.834.729.131.233.533.228.834.541.338.739.024.531.428.333.434.6
Mean water temperature(°C)-------------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Cerema CANDHIS coastal wave observatory.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List