Skip to content
Surfhog home
Menu

Belle-Île wave buoy daily means for Aug 2013

Daily means from the Belle-Île wave buoy for Aug 2013, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,488 wave-buoy observations covered all 31 days. Typical wave height was 3.1 ft (10th–90th percentile 1.8–5.5 ft), while mean peak wave period was 8.8 seconds (10th–90th percentile 7.3–10.4 seconds). Typical calculated wave power was approximately 3.1 kW/m (10th–90th percentile 1–9.7 kW/m), derived from significant wave height and energy period. 6 of 4,464 checked values (0.1%) were excluded by quality control. Across 2 comparable years, mean wave height was below the same-month mean of 4.5 ft and mean wave period was above the same-month mean of 8.6 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.1ft
Mean: 3.5 ft
P10–P90: 1.8 — 5.5 ft
Recorded extremes

1 — 10.9 ft

Mean Observed Wave Period

8.8secs
P10–P90: 7.3 — 10.4secs
Recorded extremes

3.5 — 14secs

Typical Wave Power

Approximately 3.14kW/m
Mean: 4.66kW/m
P10–P90: 0.99 — 9.7kW/m
Recorded extremes

0.34 — 39.45kW/m

Calculated from significant wave height and energy period.

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 744 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 744 hourly samples

Compared With Previous Augusts

Historical baseline from 2,969 observations across 2 years.

Wave Height
3.5ft
1ft below mean
Historical mean 4.462ft
Wave Period
8.8s
0.2s above mean
Historical mean 8.6s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Belle-Île. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Belle-Île wave buoy

Belle-Île is a CANDHIS directional buoy south of Brittany, maintained through the Cerema-coordinated sea-state observatory and research partners. Its open Atlantic position represents conditions approaching Belle-Île and the sheltered-to-exposed transition along the Morbihan coast.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
Belle-Île wave buoy daily means Aug 2013Last observation shown
Metric
Mean significant wave height (ft)4564743343332212355432266432223
Mean maximum wave height (ft)68971164565444223587654499754334
Mean peak period (s)888888886101099887881010101089101010991111
Mean average period (s)7777775658966666678999678887768
Mean period Tm02 (s)6565654546645554555776556655545
Mean peak wave directionWconcentration 100%Wconcentration 99%WSWconcentration 100%Wconcentration 99%Wconcentration 99%Wconcentration 100%Wconcentration 100%Wconcentration 100%Wconcentration 99%Wconcentration 100%Wconcentration 100%Wconcentration 100%WNWconcentration 100%Wconcentration 99%Wconcentration 100%Wconcentration 99%Wconcentration 97%Wconcentration 96%Wconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 99%Wconcentration 99%Wconcentration 100%Wconcentration 100%Wconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%
Mean directional spread (°)29.532.834.134.829.433.737.233.531.928.932.233.233.936.935.333.931.528.629.028.528.132.133.827.130.230.333.530.429.534.131.9
Mean water temperature(°C)-------------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Cerema CANDHIS coastal wave observatory.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List