Skip to content
Surfhog home
Menu

Belle-Île wave buoy observations on Fri, Aug 24, 2018

Hourly readings from the Belle-Île wave buoy for Fri, Aug 24, 2018, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

45 wave-buoy observations were recorded during the day. Typical wave height was 4 ft (10th–90th percentile 3.5–4.5 ft), while mean peak wave period was 6.9 seconds (10th–90th percentile 5.6–7.9 seconds). Typical calculated wave power was approximately 4 kW/m (10th–90th percentile 3.2–5.6 kW/m), derived from significant wave height and energy period. All 135 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Belle-Île. Use the detailed observations table below for the same data in text form.

About Belle-Île wave buoy

Belle-Île is a CANDHIS directional buoy south of Brittany, maintained through the Cerema-coordinated sea-state observatory and research partners. Its open Atlantic position represents conditions approaching Belle-Île and the sheltered-to-exposed transition along the Morbihan coast.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; hours run left to right. Times use your device time zone.
Belle-Île wave buoy hourly observations Fri, Aug 24, 2018Last observation shown
Metric
Significant wave height (ft)4444444444444--333-43444444444444445454444444455
Maximum wave height (ft)7665566677676--545-55655566675687666867776678678
Peak period (s)5566666666687--877-77777777778788888888898858555
Average period (s)5555665555666--666-66677777677777766666666566666
Peak wave directionWNWWNWWNWWWNWWNWWNWWNWWNWWNWWNWWWNW--WWW-WNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWNWWWNWWNWWNWWNWWNWWNWWNWWNW
Directional spread (°)26.619.222.025.325.727.222.623.527.823.726.427.626.0--27.127.422.3-22.520.923.623.124.424.023.329.227.121.427.624.423.123.826.224.524.327.925.328.232.027.126.426.426.723.631.429.525.2
Water temperature(°C)------------------------------------------------

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List