Skip to content
Surfhog home
Menu

Cap Ferret wave buoy daily means for Feb 2002

Daily means from the Cap Ferret wave buoy for Feb 2002, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

652 wave-buoy observations covered all 28 days. Typical wave height was 10 ft (10th–90th percentile 5.6–14.5 ft), while mean average of more than one wave period type was 13.2 seconds (10th–90th percentile 10.5–15.8 seconds). Typical calculated wave power was approximately 48.6 kW/m (10th–90th percentile 13.1–110.7 kW/m), derived from significant wave height and energy period. 2 of 1,956 checked values (0.1%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

10ft
Mean: 10.1 ft
P10–P90: 5.6 — 14.5 ft
Recorded extremes

3 — 21.8 ft

Available for 651 of 652 hourly samples

Mean Observed Wave Period

13.2secs
P10–P90: 10.5 — 15.8secs
Recorded extremes

6.9 — 17.3secs

Available for 651 of 652 hourly samples

Typical Wave Power

Approximately 48.64kW/m
Mean: 56.2kW/m
P10–P90: 13.06 — 110.67kW/m
Recorded extremes

4.32 — 241.67kW/m

Calculated from significant wave height and energy period.

Available for 619 of 652 hourly samples with wave power

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 652 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 652 hourly samples

Chart showing grouped wave observations for Cap Ferret. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Cap Ferret wave buoy

Cap Ferret is a long-running CANDHIS directional buoy off the Aquitaine coast, operated within France's national in-situ sea-state observatory. It provides an offshore reference for the energetic Bay of Biscay swell approaching the Arcachon inlet and the long, sandy and erosion-prone Landes coastline.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
Cap Ferret wave buoy daily means Feb 2002Last observation shown
Metric
Mean significant wave height (ft)11151512111812610121011910854471112910118111113
Mean maximum wave height (ft)17232318162818101518151713161286611161813151712171719
Mean peak period (s)13151615131414121515141414121014131313101312111513111314
Mean average period (s)1214141211121210131212131198101111108111091210101012
Mean period Tm02 (s)9109989989910109767877687797889
Mean peak wave directionNconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%Nconcentration 100%
Mean directional spread (°)0.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.00.0
Mean water temperature(°C)----------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Cerema CANDHIS coastal wave observatory.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List