Skip to content
Surfhog home
Menu

Île de Batz wave buoy daily means for Oct 2019

Daily means from the Île de Batz wave buoy for Oct 2019, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,490 wave-buoy observations covered all 31 days. Typical wave height was 4.2 ft (10th–90th percentile 2–7.6 ft), while mean peak wave period was 9.7 seconds (10th–90th percentile 6.4–12.7 seconds). Typical calculated wave power was approximately 5.8 kW/m (10th–90th percentile 1.2–27.9 kW/m), derived from significant wave height and energy period. 4 of 4,470 checked values (0.1%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

4.2ft
Mean: 4.5 ft
P10–P90: 2 — 7.6 ft
Recorded extremes

1 — 12.9 ft

Mean Observed Wave Period

9.7secs
P10–P90: 6.4 — 12.7secs
Recorded extremes

4.1 — 18.8secs

Typical Wave Power

Approximately 5.8kW/m
Mean: 10.18kW/m
P10–P90: 1.21 — 27.86kW/m
Recorded extremes

0.28 — 78.39kW/m

Calculated from significant wave height and energy period.

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 745 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 745 hourly samples

Chart showing grouped wave observations for Île de Batz. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Île de Batz wave buoy

Île de Batz is a CANDHIS directional buoy off northern Brittany, within the French national sea-state observatory coordinated by Cerema. The station sits at the western entrance to the English Channel, where Atlantic swell rounds Brittany towards the exposed Finistère and Channel coasts.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
Île de Batz wave buoy daily means Oct 2019Last observation shown
Metric
Mean significant wave height (ft)44265658976532447QC rejected644QC rejected244443323
Mean maximum wave height (ft)6639898121410107537710149762476764544
Mean peak period (s)999131013121412111010109910131211867121091066779
Mean average period (s)7769991012109910888912119766897765676
Mean period Tm02 (s)5656767877786767987655565554555
Mean peak wave directionWNWconcentration 100%WNWconcentration 96%WNWconcentration 100%WNWconcentration 99%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 92%Nconcentration 96%WNWconcentration 96%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%WNWconcentration 98%Nconcentration 98%Nconcentration 99%Nconcentration 100%Nconcentration 96%NWconcentration 88%
Mean directional spread (°)29.329.132.526.823.627.123.622.920.920.621.723.027.927.826.824.920.119.322.228.933.628.328.424.625.329.228.625.525.934.337.6
Mean water temperature(°C)-------------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Cerema CANDHIS coastal wave observatory.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List