Skip to content
Surfhog home
Menu

Les Pierres Noires wave buoy daily means for Apr 2008

Daily means from the Les Pierres Noires wave buoy for Apr 2008, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,440 wave-buoy observations covered all 30 days. Typical wave height was 5.1 ft (10th–90th percentile 2.3–9.6 ft), while mean peak wave period was 10.1 seconds (10th–90th percentile 7.7–12.4 seconds). Typical calculated wave power was approximately 9.5 kW/m (10th–90th percentile 1.8–41.3 kW/m), derived from significant wave height and energy period. 1 of 4,320 checked values (0%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

5.1ft
Mean: 5.5 ft
P10–P90: 2.3 — 9.6 ft
Recorded extremes

1.3 — 15.1 ft

Mean Observed Wave Period

10.1secs
P10–P90: 7.7 — 12.4secs
Recorded extremes

2.8 — 16.2secs

Typical Wave Power

Approximately 9.53kW/m
Mean: 16.14kW/m
P10–P90: 1.83 — 41.29kW/m
Recorded extremes

0.61 — 97.09kW/m

Calculated from significant wave height and energy period.

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 720 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 720 hourly samples

Chart showing grouped wave observations for Les Pierres Noires. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Les Pierres Noires wave buoy

Les Pierres Noires is a CANDHIS directional buoy west of Brittany, maintained through the French national sea-state observatory and its scientific and maritime partners. Its position near the offshore reef and lighthouse represents fully exposed Atlantic conditions approaching the Iroise Sea and western Brittany.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
Les Pierres Noires wave buoy daily means Apr 2008Last observation shown
Metric
Mean significant wave height (ft)89643432229864345654435987771012
Mean maximum wave height (ft)12139646433314139746798765714131010101519
Mean peak period (s)1112111197810108121087911912121211991212111110911
Mean average period (s)91110107677779977887101110878101110108810
Mean period Tm02 (s)788864555577656557876567877667
Mean peak wave directionWNWconcentration 99%WNWconcentration 100%Wconcentration 100%Wconcentration 100%WNWconcentration 99%WNWconcentration 98%Wconcentration 88%Wconcentration 98%Wconcentration 97%Wconcentration 97%WNWconcentration 99%WNWconcentration 100%WNWconcentration 99%Wconcentration 99%Wconcentration 99%WSWconcentration 99%WSWconcentration 89%Wconcentration 99%Wconcentration 100%Wconcentration 100%Wconcentration 100%Wconcentration 98%WSWconcentration 98%Wconcentration 100%Wconcentration 100%Wconcentration 100%Wconcentration 100%Wconcentration 100%Wconcentration 100%Wconcentration 98%
Mean directional spread (°)27.023.324.927.731.727.731.940.238.537.325.326.232.335.133.228.432.326.326.929.130.434.529.423.522.823.626.428.127.324.3
Mean water temperature(°C)------------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Cerema CANDHIS coastal wave observatory.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List