Skip to content
Surfhog home
Menu

Les Pierres Noires wave buoy daily means for Aug 2011

Daily means from the Les Pierres Noires wave buoy for Aug 2011, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,481 wave-buoy observations covered all 31 days. Typical wave height was 3.1 ft (10th–90th percentile 1.3–5.8 ft), while mean peak wave period was 9 seconds (10th–90th percentile 7.1–10.9 seconds). Typical calculated wave power was approximately 3.4 kW/m (10th–90th percentile 0.6–14 kW/m), derived from significant wave height and energy period. 3 of 4,443 checked values (0.1%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

3.1ft
Mean: 3.4 ft
P10–P90: 1.3 — 5.8 ft
Recorded extremes

0.4 — 10.8 ft

Mean Observed Wave Period

9secs
P10–P90: 7.1 — 10.9secs
Recorded extremes

4.9 — 18.9secs

Typical Wave Power

Approximately 3.37kW/m
Mean: 5.83kW/m
P10–P90: 0.59 — 14.02kW/m
Recorded extremes

0.1 — 48.29kW/m

Calculated from significant wave height and energy period.

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 742 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 742 hourly samples

Chart showing grouped wave observations for Les Pierres Noires. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Les Pierres Noires wave buoy

Les Pierres Noires is a CANDHIS directional buoy west of Brittany, maintained through the French national sea-state observatory and its scientific and maritime partners. Its position near the offshore reef and lighthouse represents fully exposed Atlantic conditions approaching the Iroise Sea and western Brittany.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
Les Pierres Noires wave buoy daily means Aug 2011Last observation shown
Metric
Mean significant wave height (ft)33243359524434433212554QC rejected5752111
Mean maximum wave height (ft)443655814747756654223885481073222
Mean peak period (s)8997987108911109999888811111089118789-
Mean average period (s)88878879889879888878101097810877910
Mean period Tm02 (s)6776776777776877766798866876677
Mean peak wave directionWconcentration 99%Wconcentration 100%Wconcentration 98%WSWconcentration 99%Wconcentration 99%Wconcentration 99%Wconcentration 99%Wconcentration 99%Wconcentration 100%Wconcentration 99%Wconcentration 99%Wconcentration 100%Wconcentration 99%WNWconcentration 99%WNWconcentration 98%Wconcentration 99%Wconcentration 99%Wconcentration 96%Wconcentration 96%Wconcentration 99%WNWconcentration 100%WNWconcentration 100%WNWconcentration 100%Wconcentration 99%Wconcentration 92%WNWconcentration 100%Wconcentration 99%Wconcentration 95%Wconcentration 97%WSWconcentration 98%SWconcentration 99%
Mean directional spread (°)28.729.431.932.229.930.033.424.928.631.926.728.732.028.530.531.632.237.336.628.922.023.426.732.029.422.430.840.434.532.938.3
Mean water temperature(°C)-------------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Cerema CANDHIS coastal wave observatory.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List