Skip to content
Surfhog home
Menu

Les Pierres Noires wave buoy monthly means for 2016

Monthly means from the Les Pierres Noires wave buoy for 2016, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Latest

Period Summary

Programmatically generated summary. Hog Says

17,086 wave-buoy observations covered 365 of 366 days (100%). Typical wave height was 5.4 ft (10th–90th percentile 2.5–12.4 ft), while mean average of more than one wave period type was 10.4 seconds (10th–90th percentile 7.5–13.3 seconds). Typical calculated wave power was approximately 11.8 kW/m (10th–90th percentile 1.9–71.9 kW/m), derived from significant wave height and energy period. 84 of 51,060 checked values (0.2%) were excluded by quality control.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

5.4ft
Mean: 6.5 ft
P10–P90: 2.5 — 12.4 ft
Recorded extremes

1 — 32.4 ft

Mean Observed Wave Period

10.4secs
P10–P90: 7.5 — 13.3secs
Recorded extremes

2.8 — 18.9secs

Available for 8,667 of 8,676 hourly samples

Typical Wave Power

Approximately 11.76kW/m
Mean: 26.16kW/m
P10–P90: 1.89 — 71.88kW/m
Recorded extremes

0.25 — 622.15kW/m

Calculated from significant wave height and energy period.

Available for 8,602 of 8,676 hourly samples with wave power

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 8,676 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 8,676 hourly samples

Chart showing grouped wave observations for Les Pierres Noires. Use the table on this page for a text version of the same measurements. To open daily observations, use a linked month name in the table.

About Les Pierres Noires wave buoy

Les Pierres Noires is a CANDHIS directional buoy west of Brittany, maintained through the French national sea-state observatory and its scientific and maritime partners. Its position near the offshore reef and lighthouse represents fully exposed Atlantic conditions approaching the Iroise Sea and western Brittany.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; months run left to right.
Les Pierres Noires wave buoy monthly means 2016Last observation shown
Metric
Mean significant wave height (ft)1211864445656QC rejected
Mean maximum wave height (ft)19171296777107912
Mean peak period (s)12121210999911111012
Mean average period (s)101098888899810
Mean peak wave directionWconcentration 96%Wconcentration 96%Wconcentration 96%Wconcentration 86%Wconcentration 91%Wconcentration 97%Wconcentration 99%Wconcentration 98%Wconcentration 99%Wconcentration 90%WNWconcentration 79%Wconcentration 87%
Mean directional spread (°)27.525.926.929.029.426.626.125.624.626.328.325.4
Mean water temperature(°C)------------

Swipe sideways to see more months.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List