Skip to content
Surfhog home
Menu

Plateau du Four wave buoy observations on Mon, Oct 2, 2017

Hourly readings from the Plateau du Four wave buoy for Mon, Oct 2, 2017, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Oldest observation available

Daily means for

Latest

Period Summary

Programmatically generated summary. Hog Says

48 wave-buoy observations were recorded during the day. Typical wave height was 4.7 ft (10th–90th percentile 4.4–5 ft), while mean peak wave period was 10.2 seconds (10th–90th percentile 9.6–10.9 seconds). Typical calculated wave power was approximately 7.9 kW/m (10th–90th percentile 6.9–8.8 kW/m), derived from significant wave height and energy period. All 144 checked values passed quality control.

Generated only from the observations and comparisons shown on this page.

Line chart showing wave height, wave period and sea temperature for Plateau du Four. Use the detailed observations table below for the same data in text form.

About Plateau du Four wave buoy

Plateau du Four is a CANDHIS station associated with the SEM-REV offshore test site off Loire-Atlantique. Located near a shallow offshore bank west of Le Croisic, it supplies environmental context for marine-energy research and for an exposed sector between the Loire estuary and southern Brittany.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; hours run left to right. Times use your device time zone.
Plateau du Four wave buoy hourly observations Mon, Oct 2, 2017Last observation shown
Metric
Significant wave height (ft)555555555554554545555555655555555554444445455555
Maximum wave height (ft)8778781078789787878678786877778787767666667778877
Peak period (s)111011101110109991199910111110101010101010101011111010111011111010111111111111101111111111
Average period (s)778777778787888888888888888988898988898889887877
Peak wave directionWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWWW
Directional spread (°)21.919.017.920.621.016.517.319.719.818.717.821.516.118.917.916.022.317.816.817.119.219.819.023.115.419.416.920.719.218.720.114.119.318.316.520.421.520.320.118.516.514.420.616.021.116.819.819.3
Water temperature(°C)------------------------------------------------

Swipe sideways to see more hours.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

Observation data source

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List