Skip to content
Surfhog home
Menu

Royan wave buoy daily means for Feb 2024

Daily means from the Royan wave buoy for Feb 2024, including available wave height, period, direction, wind and sea temperature data.

Last observation shown

Data available:  to 

Monthly means for

Latest

Period Summary

Programmatically generated summary. Hog Says

1,392 wave-buoy observations covered all 29 days. Typical wave height was 1.5 ft (10th–90th percentile 0.8–2.8 ft), while mean average of more than one wave period type was 11 seconds (10th–90th percentile 4.6–16.6 seconds). Typical calculated wave power was approximately 0.7 kW/m (10th–90th percentile 0.2–2.3 kW/m), derived from significant wave height and energy period. 49 of 2,784 checked values (1.8%) were excluded by quality control. Across 4 comparable years, mean wave height was below the same-month mean of 1.8 ft and mean wave period was below the same-month mean of 12.2 seconds.

Generated only from the observations and comparisons shown on this page.

Typical Significant Wave Height

1.5ft
Mean: 1.7 ft
P10–P90: 0.8 — 2.8 ft
Recorded extremes

0.3 — 4.7 ft

Mean Observed Wave Period

11secs
P10–P90: 4.6 — 16.6secs
Recorded extremes

1.8 — 23.4secs

Available for 694 of 696 hourly samples

Typical Wave Power

Approximately 0.72kW/m
Mean: 1.08kW/m
P10–P90: 0.22 — 2.28kW/m
Recorded extremes

0.05 — 6.26kW/m

Calculated from significant wave height and energy period.

Available for 688 of 696 hourly samples with wave power

Typical Observed Wind

-, -mph
Mean: - mph
P10–P90: - — - mph

Available for 0 of 696 hourly samples

Mean Water Temperature

-°C
P10–P90: - — -°C

Available for 0 of 696 hourly samples

Compared With Previous Februarys

Historical baseline from 3,927 observations across 4 years.

Wave Height
1.7ft
0.1ft below mean
Historical mean 1.804ft
Wave Period
11s
1.2s below mean
Historical mean 12.2s
Water Temperature
–
Not enough comparable data

Chart showing grouped wave observations for Royan. Use the table on this page for a text version of the same measurements. To open hourly observations, use a linked day name in the table.

About Royan wave buoy

Royan is part of CANDHIS, France's national in-situ sea-state observatory coordinated by Cerema and its regional partners. The station lies off the mouth of the Gironde, where Atlantic swell meets a wide, shallow and strongly tidal estuary beside the resort coastline of Royan.

Its current data source reports wave height, wave period, wave direction, directional spread and sea temperature.

Metrics are rows; days run left to right.
Royan wave buoy daily means Feb 2024Last observation shown
Metric
Mean significant wave height (ft)11111122223111121222233232112
Mean maximum wave height (ft)12122233344222232333355344212
Mean peak period (s)141413151513558778151312616171515167713109999
Mean average period (s)77777545656667657777655666665
Mean period Tm02 (s)55555444545555445555544545544
Mean peak wave direction-----------------------------
Mean directional spread (°)-----------------------------
Mean water temperature(°C)-----------------------------

Swipe sideways to see more days.

Wave metric colour key

Colours move through the scale as each number increases. They do not by themselves mean that conditions are good, safe or suitable for you.

Wave & swell height0–40+ ft
Wave & swell period0–22+ s
Wind speed0–75 mph

The displayed numbers remain the source of truth; colour is an additional visual cue.

What does buoy wave power mean?

kW/m means kilowatts of wave power per metre of wave crest. It describes the rate at which the observed sea state carries energy past the buoy.

Unlike the shore-directed forecast value, buoy wave power is the total power at the observation point. It is not projected towards a particular beach and does not predict breaking wave height.

In deep water, wave power can be calculated with:

P is approximately 0.49 times significant wave height squared times wave energy period.

P is power in kW/m, Hs is significant wave height in metres, and Te is wave energy period in seconds.

  • Provider-reported power is used when available.
  • Otherwise, a value is calculated only when both significant height and a genuine energy period are available. The ≈ symbol marks calculated values.
  • A dash is shown instead of substituting peak, Tm02, zero-crossing or other period measurements.
  • Daily and monthly figures use the mean of hourly-normalized observation power values; they are not calculated from mean height and period.

Wave direction, spectrum, water depth and local bathymetry still matter. Wave power is best read alongside height, period and direction rather than as a standalone surf-quality score.

The observation data displayed on this page is from the Cerema CANDHIS coastal wave observatory.

Learn how SurfHog combines, checks and summarizes observations in the data and methodology notes.

› Wave Buoy List